Phillips Plating Company Inc

NPDES permit NC0001881 · Major NON-POTW · effective, expires 2031-08-31 · EPA's file as of 2026-09-26

Keep this permit as a site — opens New site at EPA's facility point (35.1439, -77.0314); you set the radius.

These are the last limits EPA's file holds for this permit, from an earlier version of it (version 4 in EPA's file): its current version carries none yet. Read your permit: a renewal can change them.

EPA's record, 2025-09-01 to 2026-08-31

Last period with anything received: 2026-07-31. Most often over: Copper, total [as Cu] (4), Nickel, total [as Ni] (1).

Reporting

Reports are due about 28 days after each monitoring period ends (read off this permit's own late-day counts in EPA's filings).

• Outfall 001, form M (process wastewater to the Neuse River - Monthly): every 1 month(s), 21 values

How strict are these limits?

Each concentration limit against the same limit in comparable permits. Where it appears more than once, its strictest value.

• pH, daily minimum at least 6.8 SU — stricter than 94% of 51 other major industrial and other permits in North Carolina; 6% have the same limit
• pH, daily maximum 8.5 SU — stricter than 92% of 51 other major industrial and other permits in North Carolina; 6% have the same limit
• Copper, total [as Cu], daily maximum 5.8 ug/L — stricter than 86% of 104 other major industrial and other permits nationwide; 5% have the same limit
• Zinc, total [as Zn], daily maximum 95.1 ug/L — stricter than 80% of 66 other major industrial and other permits nationwide; 3% have the same limit
• Nickel, total [as Ni], daily maximum 74 ug/L — stricter than 68% of 32 other major industrial and other permits nationwide; 6% have the same limit
• Solids, total suspended, daily maximum 60 mg/L — stricter than 27% of 29 other major industrial and other permits in North Carolina; 3% have the same limit
• Lead, total [as Pb], daily maximum 221 ug/L — stricter than 13% of 109 other major industrial and other permits nationwide
• Oil & Grease, 30-day average 26 mg/L — stricter than 3% of 54 other major industrial and other permits nationwide; 4% have the same limit
• Solids, total suspended, 30-day average 31 mg/L — stricter than 0% of 29 other major industrial and other permits in North Carolina
• Oil & Grease, daily maximum 52 mg/L — stricter than 0% of 719 other major industrial and other permits nationwide; 1% have the same limit

5 other limits: fewer than 20 comparable permits.

Limits in force (23)

Built from EPA's ECHO bulk files. EPA's file, not the permit document, is the source: read your permit. Check a report before you file it · All states