Passage Data · Cited limits by place
402 numeric limits and guidelines for aluminum held for South Dakota and the place above it, from 9 instruments, each cited to its instrument, edition, section or page and quoted text. The register was built from 247 instruments. Everything held for South Dakota
The address to add: https://passage-data.com/mcp
https://passage-data.com/mcp.claude mcp add --transport http passage-data https://passage-data.com/mcp Then ask it, for example: “What are the aluminum limits in South Dakota? Cite each one.”
For programs: this page as JSON at /api/v1/limits?parameter=aluminum&place=US-SD; the same at https://passage-data.com/mcp, a remote MCP server (tool find_limits). llms.txt · OpenAPI
The one instrument we hold for South Dakota (US-SD) has no row for aluminum. The rows below are from the place above it, which we search too.
| Parameter | Value | Unit | Statistic | Governs | Applies when | Cite |
|---|---|---|---|---|---|---|
| Aluminum | .831 | mg/kg (pounds per million pounds) of paste produced | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (a) Subpart B—Anode and Cathode Paste Plant Wet Air Pollution Control table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .831 .369 |
| Aluminum | .369 | mg/kg (pounds per million pounds) of paste produced | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (a) Subpart B—Anode and Cathode Paste Plant Wet Air Pollution Control table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .831 .369 |
| Aluminum | 1.277 | mg/kg (pounds per million pounds) of anodes cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (b) Subpart (B)—Anode Contact Cooling and Briquette Quenching. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 1.277 .566 |
| Aluminum | .566 | mg/kg (pounds per million pounds) of anodes cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (b) Subpart (B)—Anode Contact Cooling and Briquette Quenching. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 1.277 .566 |
| Aluminum | 26.420 | mg/kg (pounds per million pounds) of anodes baked | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (c) Subpart (B)—Anode Bake Plant Wet Air Pollution Control (Closed Top Ring Furnace). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 26.420 11.720 |
| Aluminum | 11.720 | mg/kg (pounds per million pounds) of anodes baked | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (c) Subpart (B)—Anode Bake Plant Wet Air Pollution Control (Closed Top Ring Furnace). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 26.420 11.720 |
| Aluminum | .306 | mg/kg (pounds per million pounds) of anodes baked | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (d) Subpart B—Anode Bake Plant Wet Air Pollution Control (Open Top Ring Furnace With Spray Tower Only). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .306 .136 |
| Aluminum | .136 | mg/kg (pounds per million pounds) of anodes baked | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (d) Subpart B—Anode Bake Plant Wet Air Pollution Control (Open Top Ring Furnace With Spray Tower Only). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .306 .136 |
| Aluminum | 4.461 | mg/kg (pounds per million pounds) of anodes baked | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (e) Subpart B—Anode Bake Plant Wet Air Pollution Control (Open Top Ring Furnace With Wet Electrostatic Precipitator and Spray Tower). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 4.461 1.979 |
| Aluminum | 1.979 | mg/kg (pounds per million pounds) of anodes baked | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (e) Subpart B—Anode Bake Plant Wet Air Pollution Control (Open Top Ring Furnace With Wet Electrostatic Precipitator and Spray Tower). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 4.461 1.979 |
| Aluminum | 6.953 | mg/kg (pounds per million pounds) of anodes baked | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (f) Subpart B—Anode Bake Plant Wet Air Pollution Control (Tunnel Kiln). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 6.953 3.084 |
| Aluminum | 3.084 | mg/kg (pounds per million pounds) of anodes baked | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (f) Subpart B—Anode Bake Plant Wet Air Pollution Control (Tunnel Kiln). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 6.953 3.084 |
| Aluminum | 273.200 | mg/kg (pounds per million pounds) of cryolite recovered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (g) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Not Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 273.200 122.600 |
| Aluminum | 122.600 | mg/kg (pounds per million pounds) of cryolite recovered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (g) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Not Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 273.200 122.600 |
| Aluminum | 214.000 | mg/kg (pounds per million pounds) of cryolite recovered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (h) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 214.000 94.930 |
| Aluminum | 94.930 | mg/kg (pounds per million pounds) of cryolite recovered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (h) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 214.000 94.930 |
| Aluminum | .000 | mg/kg (pound per million pounds) of cryolite recovered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (i) Subpart B—Cathode Reprocessing (Operated With Wet Potline Scrubbing). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of cryolite recovered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (i) Subpart B—Cathode Reprocessing (Operated With Wet Potline Scrubbing). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | 5.120 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (j) Subpart B—Potline Wet Air Pollution Control (Operated Without Cathode Reprocessing). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 5.120 2.271 |
| Aluminum | 2.271 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (j) Subpart B—Potline Wet Air Pollution Control (Operated Without Cathode Reprocessing). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 5.120 2.271 |
| Aluminum | 6.537 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (k) Subpart B—Potline Wet Air Pollution Control (Operated With Cathode Reprocessing and Not Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 6.537 2.933 |
| Aluminum | 2.933 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (k) Subpart B—Potline Wet Air Pollution Control (Operated With Cathode Reprocessing and Not Commingled With Other Process or Nonprocess Waters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 6.537 2.933 |
| Aluminum | 5.120 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (l) Potline Wet Air Pollution Control Cooperated With Cathode Reprocessing and Commingled With Other Process or Nonprocess Wastewaters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 5.120 2.271 |
| Aluminum | 2.271 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (l) Potline Wet Air Pollution Control Cooperated With Cathode Reprocessing and Commingled With Other Process or Nonprocess Wastewaters). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 5.120 2.271 |
| Aluminum | 10.140 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (m) Subpart B—Potroom Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 10.140 4.499 |
| Aluminum | 4.499 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (m) Subpart B—Potroom Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 10.140 4.499 |
| Aluminum | 8.194 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (n) Subpart B—Potline SO 2 Emissions Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 8.194 3.634 |
| Aluminum | 3.634 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (n) Subpart B—Potline SO 2 Emissions Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 8.194 3.634 |
| Aluminum | 15.940 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (o) Subpart B—Degassing Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 15.940 7.071 |
| Aluminum | 7.071 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (o) Subpart B—Degassing Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 15.940 7.071 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (p) Subpart B—Pot Repair and Pot Soaking. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (p) Subpart B—Pot Repair and Pot Soaking. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | 8.120 | mg/kg (pound per million pounds) of aluminum product from direct chill casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (q) Subpart B—Direct Chill Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 8.120 3.602 |
| Aluminum | 3.602 | mg/kg (pound per million pounds) of aluminum product from direct chill casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (q) Subpart B—Direct Chill Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum 8.120 3.602 |
| Aluminum | .636 | mg/kg (pound per million pounds) of aluminum product from rod casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (r) Subpart B—Continuous Rod Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .636 .282 |
| Aluminum | .282 | mg/kg (pound per million pounds) of aluminum product from rod casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (r) Subpart B—Continuous Rod Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .636 .282 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum product from stationary casting or shot casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (s) Subpart B—Stationary Casting or Shot Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum product from stationary casting or shot casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory existing sources (BAT) (s) Subpart B—Stationary Casting or Shot Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.23 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of paste produced | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (a) Subpart B—Anode and Cathode Paste Plant Wet Air. table: Pollution Control—NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of paste produced | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (a) Subpart B—Anode and Cathode Paste Plant Wet Air. table: Pollution Control—NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | 1.277 | mg/kg (pound per million pounds) of anodes cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (b) Subpart B—Anode Contact Cooling and Briquette Quenching. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 1.277 .566 |
| Aluminum | .566 | mg/kg (pound per million pounds) of anodes cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (b) Subpart B—Anode Contact Cooling and Briquette Quenching. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 1.277 .566 |
| Aluminum | .000 | mg/kg (pound per million pounds) of anodes baked | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (c) Subpart B—Anode Bake Plant Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of anodes baked | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (c) Subpart B—Anode Bake Plant Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | 273.200 | mg/kg (pound per million pounds) of cryolite recovered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (d) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Not Commingled With Other Process or Nonprocess Waters). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 273.200 122.600 |
| Aluminum | 122.600 | mg/kg (pound per million pounds) of cryolite recovered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (d) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Not Commingled With Other Process or Nonprocess Waters). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 273.200 122.600 |
| Aluminum | 214.000 | mg/kg (pound per million pounds) of cryolite recovered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (e) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Commingled With Other Process or Nonprocess Waters). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 214.000 94.930 |
| Aluminum | 94.930 | mg/kg (pound per million pounds) of cryolite recovered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (e) Subpart B—Cathode Reprocessing (Operated With Dry Potline Scrubbing and Commingled With Other Process or Nonprocess Waters). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 214.000 94.930 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (f) Subpart B—Potline Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (f) Subpart B—Potline Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (g) Subpart B—Potroom Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (g) Subpart B—Potroom Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | 8.194 | mg/kg (pound per million pounds) aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (h) Subpart B—Potline SO 2 Emissions Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 8.194 3.634 |
| Aluminum | 3.634 | mg/kg (pound per million pounds) aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (h) Subpart B—Potline SO 2 Emissions Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 8.194 3.634 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (i) Subpart B—Degassing Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (i) Subpart B—Degassing Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (j) Subpart B—Pot Repair and Pot Soaking. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound per million pounds) of aluminum produced from electrolytic reduction | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (j) Subpart B—Pot Repair and Pot Soaking. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | 8.120 | mg/kg (pound per million pounds) of aluminum product from direct chill casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (k) Subpart B—Direct Chill Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 8.120 3.602 |
| Aluminum | 3.602 | mg/kg (pound per million pounds) of aluminum product from direct chill casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (k) Subpart B—Direct Chill Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum 8.120 3.602 |
| Aluminum | .636 | mg/kg (pound per million pounds) of aluminum product from rod casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (l) Subpart B—Continuous Rod Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .636 .282 |
| Aluminum | .282 | mg/kg (pound per million pounds) of aluminum product from rod casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (l) Subpart B—Continuous Rod Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .636 .282 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum product from stationary casting or shot casting | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (m) Subpart B—Stationary Casting or Shot Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum product from stationary casting or shot casting | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart B—Primary Aluminum Smelting Subcategory new sources (NSPS) (m) Subpart B—Stationary Casting or Shot Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.24 (NSPS) Aluminum .000 .000 |
| Aluminum | 1.0 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BPT) (d) The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart and which processes residues by wet methods, after application of the best practical control technology currently available: table: Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.32 (BPT) Aluminum 1.0 |
| Aluminum | .000 | mg/kg (pound's per million pounds) of aluminum scrap dried | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (a) Subpart C—Scrap Drying Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound's per million pounds) of aluminum scrap dried | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (a) Subpart C—Scrap Drying Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound's per million pounds) of aluminum scrap screened and milled | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (b) Subpart C—Scrap Screening and Milling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pound's per million pounds) of aluminum scrap screened and milled | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (b) Subpart C—Scrap Screening and Milling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | 66.410 | mg/kg (pound's per million pounds) of dross washed | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (c) Subpart C—Dross Washing. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 66.410 29.450 |
| Aluminum | 29.450 | mg/kg (pound's per million pounds) of dross washed | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (c) Subpart C—Dross Washing. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 66.410 29.450 |
| Aluminum | 4.711 | mg/kg (lb/million lbs) of aluminum demagged | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (d) Subpart C—Demagging Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 4.711 2.090 |
| Aluminum | 2.090 | mg/kg (lb/million lbs) of aluminum demagged | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (d) Subpart C—Demagging Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 4.711 2.090 |
| Aluminum | 2.035 | mg/kg (pound's per million pounds) of aluminum delacquered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (e) Subpart C—Delacquering Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 2.035 0.903 |
| Aluminum | 0.903 | mg/kg (pound's per million pounds) of aluminum delacquered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (e) Subpart C—Delacquering Wet Air Pollution Control. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 2.035 0.903 |
| Aluminum | 8.120 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (f) Subpart C—Direct Chill Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 8.120 3.602 |
| Aluminum | 3.602 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (f) Subpart C—Direct Chill Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 8.120 3.602 |
| Aluminum | 0.409 | mg/kg (lb/million lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (g) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Not Practiced On-Site). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 0.409 0.182 |
| Aluminum | 0.182 | mg/kg (lb/million lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (g) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Not Practiced On-Site). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum 0.409 0.182 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (h) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chloride Demagging Wet Air Pollution Control is Practiced On Site). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (h) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chloride Demagging Wet Air Pollution Control is Practiced On Site). table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (i) Subpart C—Stationary Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (i) Subpart C—Stationary Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (j) Subpart C—Shot Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory existing sources (BAT) (j) Subpart C—Shot Casting Contact Cooling. table: BAT Effluent Limitations | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.33 (BAT) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum scrap dried | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (a) Subpart C—Scrap Drying Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum scrap dried | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (a) Subpart C—Scrap Drying Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum scrap screened and milled | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (b) Subpart C—Scrap Screening and Milling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum scrap screened and milled | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (b) Subpart C—Scrap Screening and Milling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of dross washed | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (c) Subpart C—Dross Washing. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of dross washed | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (c) Subpart C—Dross Washing. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | 4.711 | mg/kg (lb/million lbs) of aluminum demagged | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (d) Subpart C—Demagging Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 4.711 2.090 |
| Aluminum | 2.090 | mg/kg (lb/million lbs) of aluminum demagged | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (d) Subpart C—Demagging Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 4.711 2.090 |
| Aluminum | 2.035 | mg/kg (pounds per million pounds) of aluminum delacquered | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (e) Subpart C—Delacquering Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 2.035 0.903 |
| Aluminum | 0.903 | mg/kg (pounds per million pounds) of aluminum delacquered | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (e) Subpart C—Delacquering Wet Air Pollution Control. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 2.035 0.903 |
| Aluminum | 8.120 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (f) Subpart C—Direct Chill Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 8.120 3.602 |
| Aluminum | 3.602 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (f) Subpart C—Direct Chill Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 8.120 3.602 |
| Aluminum | 0.409 | mg/kg (lb/million lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (g) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Not Practiced On-Site). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 0.409 0.182 |
| Aluminum | 0.182 | mg/kg (lb/million lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (g) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Not Practiced On-Site). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum 0.409 0.182 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (h) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Practiced On Site). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (h) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Practiced On Site). table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (i) Subpart C—Stationary Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (i) Subpart C—Stationary Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (j) Subpart C—Shot Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Aluminum | .000 | mg/kg (pounds per million pounds) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 421 the discharge is of the Subpart C—Secondary Aluminum Smelting Subcategory new sources (NSPS) (j) Subpart C—Shot Casting Contact Cooling. table: NSPS | 40 CFR Part 421 — PART 421—NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 421.34 (NSPS) Aluminum .000 .000 |
| Al | 2.0 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 440 the discharge is of the Subpart B—Aluminum Ore Subcategory existing sources (BAT) | 40 CFR Part 440 — PART 440—ORE MINING AND DRESSING POINT SOURCE CATEGORY 40 CFR 440.23 (BAT) Al 2.0 1.0 |
| Al | 1.0 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 440 the discharge is of the Subpart B—Aluminum Ore Subcategory existing sources (BAT) | 40 CFR Part 440 — PART 440—ORE MINING AND DRESSING POINT SOURCE CATEGORY 40 CFR 440.23 (BAT) Al 2.0 1.0 |
| Al | 2.0 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 440 the discharge is of the Subpart B—Aluminum Ore Subcategory new sources (NSPS) | 40 CFR Part 440 — PART 440—ORE MINING AND DRESSING POINT SOURCE CATEGORY 40 CFR 440.24 (NSPS) Al 2.0 1.0 |
| Al | 1.0 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 440 the discharge is of the Subpart B—Aluminum Ore Subcategory new sources (NSPS) | 40 CFR Part 440 — PART 440—ORE MINING AND DRESSING POINT SOURCE CATEGORY 40 CFR 440.24 (NSPS) Al 2.0 1.0 |
| Aluminum | 15.3 | mg/m (pounds per 1 million ft ) of area processed | daily maximum | effluent · limit | route: direct cites: 40 CFR 465 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BPT) table: Subpart C | 40 CFR Part 465 — PART 465—COIL COATING POINT SOURCE CATEGORY 40 CFR 465.31 (BPT) Aluminum 15.3 (3.14) 6.26. (1.28) |
| Aluminum | 4.49 | mg/m (pounds per 1 million ft ) of area processed | daily maximum | effluent · limit | route: direct cites: 40 CFR 465 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BAT) table: Subpart C | 40 CFR Part 465 — PART 465—COIL COATING POINT SOURCE CATEGORY 40 CFR 465.32 (BAT) Aluminum 4.49 (0.92) 1.84. (0.38) |
| Aluminum | 1.44 | mg/m² (pounds per 1 million ft ) of area processed | daily maximum | effluent · limit | route: direct cites: 40 CFR 465 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart. table: Subpart C | 40 CFR Part 465 — PART 465—COIL COATING POINT SOURCE CATEGORY 40 CFR 465.33 (NSPS) Aluminum 1.44 (0.30) 0.59 (0.121) |
| Aluminum | 0.59 | mg/m² (pounds per 1 million ft ) of area processed | monthly average | effluent · limit | route: direct cites: 40 CFR 465 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart. table: Subpart C | 40 CFR Part 465 — PART 465—COIL COATING POINT SOURCE CATEGORY 40 CFR 465.33 (NSPS) Aluminum 1.44 (0.30) 0.59 (0.121) |
| Aluminum | 182.20 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BPT) table: Subpart A—BPT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.11 (BPT) Aluminum 182.20 36.87 74.47 15.07 |
| Aluminum | 36.87 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BPT) table: Subpart A—BPT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.11 (BPT) Aluminum 182.20 36.87 74.47 15.07 |
| Aluminum | 74.47 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BPT) table: Subpart A—BPT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.11 (BPT) Aluminum 182.20 36.87 74.47 15.07 |
| Aluminum | 15.07 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BPT) table: Subpart A—BPT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.11 (BPT) Aluminum 182.20 36.87 74.47 15.07 |
| Aluminum | 182.00 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BAT) table: Subpart A—BAT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.12 (BAT) Aluminum 182.00 5.74 74.48 2.35 |
| Aluminum | 5.74 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BAT) table: Subpart A—BAT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.12 (BAT) Aluminum 182.00 5.74 74.48 2.35 |
| Aluminum | 74.48 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BAT) table: Subpart A—BAT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.12 (BAT) Aluminum 182.00 5.74 74.48 2.35 |
| Aluminum | 2.35 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory existing sources (BAT) table: Subpart A—BAT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.12 (BAT) Aluminum 182.00 5.74 74.48 2.35 |
| Aluminum | 30.3 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart A—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.13 (NSPS) Aluminum 30.3 3.82 12.4 1.56 |
| Aluminum | 3.82 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart A—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.13 (NSPS) Aluminum 30.3 3.82 12.4 1.56 |
| Aluminum | 12.4 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart A—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.13 (NSPS) Aluminum 30.3 3.82 12.4 1.56 |
| Aluminum | 1.56 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart A—Steel Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart A—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.13 (NSPS) Aluminum 30.3 3.82 12.4 1.56 |
| Aluminum | 3.16 | Mg/m² (pounds per/1million ft ) of Area Coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory existing sources (BPT) (b) The discharge of process wasterwater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—BPT Effluent Limitations | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.21 (BPT) Aluminum 3.16 (0.65) 1.29 (0.27) |
| Aluminum | 1.29 | Mg/m² (pounds per/1million ft ) of Area Coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory existing sources (BPT) (b) The discharge of process wasterwater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—BPT Effluent Limitations | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.21 (BPT) Aluminum 3.16 (0.65) 1.29 (0.27) |
| Aluminum | 5.74 | Mg/m² (pounds per/million ft²) of area coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory existing sources (BAT) (b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—BAT Effluent Limitations | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.22 (BAT) Aluminum 5.74 (1.18) 2.35 (0.48) |
| Aluminum | 2.35 | Mg/m² (pounds per/million ft²) of area coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory existing sources (BAT) (b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—BAT Effluent Limitations | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.22 (BAT) Aluminum 5.74 (1.18) 2.35 (0.48) |
| Aluminum | 3.82 | Mg/m² (pounds per million ft²) of area coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory new sources (NSPS) (b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—NSPS | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.23 (NSPS) Aluminum 3.82 (0.78) 1.56 (0.32) |
| Aluminum | 1.56 | Mg/m² (pounds per million ft²) of area coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart B—Cast Iron Basis Material Subcategory new sources (NSPS) (b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below: table: Subpart B—NSPS | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.23 (NSPS) Aluminum 3.82 (0.78) 1.56 (0.32) |
| Aluminum | 176.98 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BPT) table: Subpart C—BPT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.31 (BPT) Aluminum 176.98 68.44 72.35 27.98 |
| Aluminum | 68.44 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BPT) table: Subpart C—BPT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.31 (BPT) Aluminum 176.98 68.44 72.35 27.98 |
| Aluminum | 72.35 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BPT) table: Subpart C—BPT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.31 (BPT) Aluminum 176.98 68.44 72.35 27.98 |
| Aluminum | 27.98 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BPT) table: Subpart C—BPT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.31 (BPT) Aluminum 176.98 68.44 72.35 27.98 |
| Aluminum | 176.98 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BAT) table: Subpart C—BAT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.32 (BAT) Aluminum 176.98 5.74 72.35 2.35 |
| Aluminum | 5.74 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BAT) table: Subpart C—BAT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.32 (BAT) Aluminum 176.98 5.74 72.35 2.35 |
| Aluminum | 72.35 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BAT) table: Subpart C—BAT Effluent Limitations column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.32 (BAT) Aluminum 176.98 5.74 72.35 2.35 |
| Aluminum | 2.35 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory existing sources (BAT) table: Subpart C—BAT Effluent Limitations column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.32 (BAT) Aluminum 176.98 5.74 72.35 2.35 |
| Aluminum | 29.46 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart C—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.33 (NSPS) Aluminum 29.46 3.82 12.06 1.56 |
| Aluminum | 3.82 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart C—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.33 (NSPS) Aluminum 29.46 3.82 12.06 1.56 |
| Aluminum | 12.06 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart C—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.33 (NSPS) Aluminum 29.46 3.82 12.06 1.56 |
| Aluminum | 1.56 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart C—Aluminum Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart C—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.33 (NSPS) Aluminum 29.46 3.82 12.06 1.56 |
| Aluminum | 50.97 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart D—Copper Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart D—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.43 (NSPS) Aluminum 50.97 3.82 20.86 1.56 |
| Aluminum | 3.82 | mg/m² of area processed or coated | daily maximum | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart D—Copper Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart D—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.43 (NSPS) Aluminum 50.97 3.82 20.86 1.56 |
| Aluminum | 20.86 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart D—Copper Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart D—NSPS column: Metal preparation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.43 (NSPS) Aluminum 50.97 3.82 20.86 1.56 |
| Aluminum | 1.56 | mg/m² of area processed or coated | monthly average | effluent · limit | route: direct cites: 40 CFR 466 the discharge is of the Subpart D—Copper Basis Material Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards: table: Subpart D—NSPS column: Coating operation | 40 CFR Part 466 — PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY 40 CFR 466.43 (NSPS) Aluminum 50.97 3.82 20.86 1.56 |
| Aluminum | 0.525 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.525 0.257 |
| Aluminum | 0.257 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.525 0.257 |
| Aluminum | 0.356 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.356 0.174 |
| Aluminum | 0.174 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.356 0.174 |
| Aluminum | 0.0127 | mg/off-kg (lb/million off-lbs) of aluminum sheet cast by continuous methods | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.0127 0.0063 |
| Aluminum | 0.0063 | mg/off-kg (lb/million off-lbs) of aluminum sheet cast by continuous methods | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 0.0127 0.0063 |
| Aluminum | 49.55 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 24.66 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 1.15 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 0.573 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 89.46 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 44.52 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 102.24 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 50.88 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.12 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 0.525 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.525 0.257 |
| Aluminum | 0.257 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.525 0.257 |
| Aluminum | 0.356 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.356 0.174 |
| Aluminum | 0.174 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.356 0.174 |
| Aluminum | 0.0127 | mg/off-kg (lb/million off-lbs) of aluminum sheet cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.0127 0.0062 |
| Aluminum | 0.0062 | mg/off-kg (lb/million off-lbs) of aluminum sheet cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 0.0127 0.0062 |
| Aluminum | 13.10 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 13.10 6.518 |
| Aluminum | 6.518 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 13.10 6.518 |
| Aluminum | 1.151 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 1.151 0.573 |
| Aluminum | 0.573 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 1.151 0.573 |
| Aluminum | 8.944 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 8.944 4.45 |
| Aluminum | 4.45 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 8.944 4.45 |
| Aluminum | 12.43 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 12.43 6.186 |
| Aluminum | 6.186 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.13 (BAT) Aluminum 12.43 6.186 |
| Aluminum | 0.499 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.499 0.221 |
| Aluminum | 0.221 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.499 0.221 |
| Aluminum | 0.338 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.338 0.150 |
| Aluminum | 0.150 | mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.338 0.150 |
| Aluminum | 0.012 | mg/off-kg (lb/million off-lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.012 0.0053 |
| Aluminum | 0.0053 | mg/off-kg (lb/million off-lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 0.012 0.0053 |
| Aluminum | 12.45 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 12.45 5.52 |
| Aluminum | 5.52 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 12.45 5.52 |
| Aluminum | 1.094 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 1.094 0.485 |
| Aluminum | 0.485 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 1.094 0.485 |
| Aluminum | 8.50 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 8.50 3.70 |
| Aluminum | 3.70 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 8.50 3.70 |
| Aluminum | 11.81 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 11.81 5.24 |
| Aluminum | 5.24 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart A—Rolling With Neat Oils Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.14 (NSPS) Aluminum 11.81 5.24 |
| Aluminum | 0.84 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 0.84 0.416 |
| Aluminum | 0.416 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 0.84 0.416 |
| Aluminum | 8.55 | mg/off-kg (lb/million off-lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 8.55 4.26 |
| Aluminum | 4.26 | mg/off-kg (lb/million off-lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 8.55 4.26 |
| Aluminum | 49.55 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 24.66 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 1.15 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 0.573 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 89.46 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 44.52 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 102.24 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 50.88 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.22 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 0.84 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 0.84 0.42 |
| Aluminum | 0.42 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 0.84 0.42 |
| Aluminum | 8.55 | mg/off-kg (lb/million off-lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 8.55 4.26 |
| Aluminum | 4.26 | mg/off-kg (lb/million off-lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 8.55 4.26 |
| Aluminum | 13.10 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 13.10 6.52 |
| Aluminum | 6.52 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 13.10 6.52 |
| Aluminum | 1.15 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 1.15 0.573 |
| Aluminum | 0.573 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 1.15 0.573 |
| Aluminum | 8.95 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 8.95 4.45 |
| Aluminum | 4.45 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 8.95 4.45 |
| Aluminum | 12.43 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 12.43 6.19 |
| Aluminum | 6.19 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory existing sources (BAT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.23 (BAT) Aluminum 12.43 6.19 |
| Aluminum | 0.80 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 0.80 0.35 |
| Aluminum | 0.35 | mg/off-kg (lb/million off-lbs) of aluminum rolled with emulsions | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 0.80 0.35 |
| Aluminum | 8.12 | mg/off-kg (lb/million off-lbs) of aluminum cast by semicontinuous methods | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 8.12 3.60 |
| Aluminum | 3.60 | mg/off-kg (lb/million off-lbs) of aluminum cast by semicontinuous methods | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 8.12 3.60 |
| Aluminum | 12.45 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 12.45 5.52 |
| Aluminum | 5.52 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 12.45 5.52 |
| Aluminum | 1.094 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 1.094 0.485 |
| Aluminum | 0.485 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 1.094 0.485 |
| Aluminum | 8.50 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 8.50 3.77 |
| Aluminum | 3.77 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 8.50 3.77 |
| Aluminum | 11.81 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 11.81 5.24 |
| Aluminum | 5.24 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart B—Rolling With Emulsions Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following performance standards. The discharge of process wastewater pollutants from the core shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.24 (NSPS) Aluminum 11.81 5.24 |
| Aluminum | 2.34 | mg/off-kg (lb/million off-lbs) of aluminum extruded | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 2.34 1.16 |
| Aluminum | 1.16 | mg/off-kg (lb/million off-lbs) of aluminum extruded | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 2.34 1.16 |
| Aluminum | 9.51 | mg/off-kg (lb/million off-lbs) of aluminum extruded | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 9.51 4.73 |
| Aluminum | 4.73 | mg/off-kg (lb/million off-lbs) of aluminum extruded | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 9.51 4.73 |
| Aluminum | 8.55 | mg/off-kg (lb/million off-lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 8.55 4.26 |
| Aluminum | 4.26 | mg/off-kg (lb/million off-lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 8.55 4.26 |
| Aluminum | 49.55 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 24.66 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 49.55 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 24.66 | mg/off-kg (lb/million off-lbs) of aluminum quenched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 49.55 24.66 |
| Aluminum | 1.15 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 0.573 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 1.15 0.573 |
| Aluminum | 89.46 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 44.52 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 89.46 44.52 |
| Aluminum | 102.24 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 50.88 | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 102.24 50.88 |
| Aluminum | 16.78 | mg/off-kg (lb/million off-lbs) of aluminum degassed | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 16.78 8.35 |
| Aluminum | 8.35 | mg/off-kg (lb/million off-lbs) of aluminum degassed | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BPT) | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.32 (BPT) Aluminum 16.78 8.35 |
| Aluminum | 2.19 | mg/off-kg (lb/million off-lbs) of aluminum extruded | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 2.19 1.09 |
| Aluminum | 1.09 | mg/off-kg (lb/million off-lbs) of aluminum extruded | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 2.19 1.09 |
| Aluminum | 9.51 | mg/off-kg (lb/million off-lbs) of aluminum extruded | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 9.51 4.73 |
| Aluminum | 4.73 | mg/off-kg (lb/million off-lbs) of aluminum extruded | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 9.51 4.73 |
| Aluminum | 8.55 | mg/off-kg (lb/million off-lbs) of aluminum cast | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 8.55 4.26 |
| Aluminum | 4.26 | mg/off-kg (lb/million off-lbs) of aluminum cast | monthly average | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 8.55 4.26 |
| Aluminum | 13.10 | mg/off-kg (lb/million off-lbs) of aluminum quenched | daily maximum | effluent · limit | route: direct cites: 40 CFR 467 the discharge is of the Subpart C—Extrusion Subcategory existing sources (BAT) (c) The discharge of wastewater pollutants from the core and ancillary operation except those in (b) of this section, shall not exceed the values set forth below: | 40 CFR Part 467 — PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY 40 CFR 467.33 (BAT) Aluminum 13.10 6.52 |
This page shows the first 250 of 402 rows, South Dakota's own first. All of them, as JSON 200 at a time: 1–200 · 201–400 · 401–402
Every instrument we hold for South Dakota (US-SD) and the place above it, United States (US): 67 instruments, for every parameter name matching “aluminum”: aluminum, aluminum ionic, aluminum total, total aluminum, aluminum dissolved, aluminum phosphide, aluminum metaphosphate, acetic acid aluminum salt, aluminum sodium phosphate, total recoverable aluminum, aluminum chloride hydroxide, aluminum tris o ethylphosphonate, and 12 more (in the JSON).
4b59a142f54a91aef8356c2f3c507cc96e171e01344aa388d2f55e6832ed2925 — 224 rows hered7cfd73b5bcf0e961e02ec53264492b2371277280003192841b7166b2a5012cf — 105 rows here4a4e95e44a16b28b58efce43eca3878d712f9aaf1b73e5c36c783cc12c9bc06b — 34 rows here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — 19 rows here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — 9 rows hereaea3b68c1fc9aac4ea3fa56240df79cf606e97c278fd0b499c3ec190dad2ee9a — 4 rows here817c320835fb2f9cbb5e6218efb2f5cdcb0b0527933ae87d5a3976f0981127fd — 4 rows herebe6b429558db9852c3456eb22c17046aa1a3335ee89e702e8afb793f9b5b25ec — 2 rows herea98e8b66948f546c71e119055eff012e6380857a255ec216a4247b658bcf040d — 1 row here9f178f66686e289aea4d4961eee13479c15774e48d25aea14710655d2aeb18f7 — no row hereaa9ac14c0ef8e5cffe6bfb5a5368ab853aa9128404ac004a3de7bc0bab0c24bd — no row here28dbdea077be653555fa562c999b78c741237e57d5b8efc8606d183ce33279da — no row here56de9012822853c75f8513babf1c1440ff957ff2145a12ec8ef5c1906da02f2d — no row here39a50407f4cd89036e245861437f7961e58a8451efaa9fd6330ff45d381fa205 — no row here69910d7277f8067273b796c1905c6283621bc7c72723b388bab9b5c8f7983742 — no row here02c53988595c9f2911727f635f59f6a2af0c1d50ce06550c150a706321a505b3 — no row here14a34390b41a1060c6d5d7ede5e6018f118680d1cb54643b81fa9b50abea37c4 — no row here2b162dead6acf77f69bd8a2a79a6195c30a6f7a6c82e29ec4754657603f1202d — no row here9c6c38baf048e0e1ed5f2c05df397ea581d48822b23c4b294e52b960b2d547f9 — no row here8652d1f3d1271a60d9c07a11c5e00c0c1e23da3fb57f25d86e40b9a487b25608 — no row hereebf67428a51e85f12785b92d537e6878c5f9838c87722ac2db82b3db673d1e23 — no row here4b5bd5a797a31a077d5a797de292aab3ed4938bf350995c3877c393d3c1f8428 — no row here881822302cd9912ec4678ba7ccaa00276ff06f33a48ae154f399db6986c1ffda — no row here3bac23cae59f82ac6f96310d28b2d8904c650932053de79f037f6d4f6d3db849 — no row here15d00b2386811ecfdcc8334d57defe2f690d2f88798390abff59228c5aea1898 — no row here5b10885a56878a0a10277b8fdf945441e570a9316098995bb3f948e5bc5a52d9 — no row here60cadc14b8fc25c39238a9d55cede55743d6b349ca20c8f8158b0f7e5d98fd64 — no row hereb9ba02c4f274d6907407c320e0fcce140e72aa79cf2e81ae80ae804f723e7bed — no row here9984c22aee31f14ac6cc89b6895db16ce8ed6cdc39abf66752529e44a86fda45 — no row herea824cc1c96559e03e9d0013c6dc961092352baafce6b5daec6be1d3c9ef96c4f — no row here2aa1dbe8158371fa4360d0df2412ad8b47c124aab4173316b854dc9c06d9161a — no row herecb5058a08c9472074411dfb00b10ae90efb4763be56c41b6c33d5fec477a555b — no row here8ffc3a5ae0e6c7d8e929b9201225a003c95d5c0e6a73ed549ae0ef4bb94b22ed — no row here6ee241b7ee9a78250fccd4d4134366c8ccc74eceba4512675bc5db8a5be24cc5 — no row here3b1a8b869cb040029bdcb18f0ff232995cfc9774f16112f5700bb1f5cb31daa4 — no row heree30d763aa2bf49914b8b02364329ed662c0af2bc1ac6ee13233ee65c1499a94e — no row here59437ebfad1a7c3090dc8f3f11eac33d1cfa8c81e44baf92b3fcbfc75b584c19 — no row heree485b5e90afd26961e2964355f78ce1d1a1781ac67e588a9f2ea6fd1ad913db2 — no row here699f842280ca1f65a56712a21ad9906bb9d709f20624757e72df02c7f695e73e — no row here8e0e010c4a042c3d2350a03bd7a7c8a98559afa3a2ffa45a702685c0621afd01 — no row here23be7bb993614d9248cff594a196b782587671393fc7b4f445eab69876b224d8 — no row here109ea8c5ee22a37622c2aa91dd21d79e528a5f9f3e9d01ecc8dc18c25b6afd9e — no row here9330b2255a5f7e74daf9175af898d9d28ae855a2560f50658d1bce4c6b8feded — no row here4f4bb5077485ea6f8a27e678219c7400c18be7ca7824e5b21d1996399098cbc4 — no row hereb8df51b8c9ab0f6d765b07cb267f1aead5f9a257b5d9d914fb34511c1433a9bd — no row here0d9785d9dc37e256a6ea799566e33681f123b092975ccaaa01967665080b1598 — no row hereb5d02b5c87984639aaff6e500a6930c9e7b478cec825c013f26c72f715e32a0e — no row here07ce62c90f736e9aacb3b93854b6861d2d14ec3c7ed85146da489eb46ca5ebca — no row here6abcaec659f7bd98f5861813fc76e8a2f027753ba5488ec0da9540b3dff013a2 — no row hereca4f7d499465d74e9f9e97bbad32419b9e4d71c107bd17c21ec9348b86c19167 — no row here36066b7d5702811c70e1498b6ff9647599f1a883a18bd95449abc5900832e375 — no row here5903548fcfa58a4b6152d41cd1399b4c82e3684e69d5ea20a0fb89c1b71e4329 — no row here904434c6e85600060669580acf042d53f5e711e3313e8aef038d9c60b244a740 — no row here465264d203dabbec52b8a9e5afc03c9b9140c4f1758d0f5cf422a0df03d3cce3 — no row heree78d4825199d5ba2cf468f744603f403b7dbddbe3321955e6a0b1e344de50d7f — no row heree9b2ea900bfea837890cb559b8db71416882d7666c81b683b11bdc700efb7b50 — no row here83f54e1a9420fdb3abe9a4e4e8edd2060bbc0c5e0067824488d3f0f1cc50d328 — no row here940c0585603141d76af0790879f64c667489809aac317d090485198f492a1311 — no row here3a0399ddea806eb34f0fe9b3c15efa97679757f340a125b4af5fdc234a93fe6c — no row here4fcd842aa8d4463c015d5dc67a32412a7c554ad425715bb2375e64800bf4e7bd — no row here2133233aad39c4df1dfd22825d228cb8ca25365a51aadadb9aacb46241c2ceea — no row here857e290109cd8028b70b239ab2b16e9c5d068a71e557a7c419ebba4dee2c40b4 — no row herec69109252c9521cd31b45755731369a860bb1282c273dea5fd6903836effa7c7 — no row herebd534eb2d8af38e141e1cd6236134a638298fbf14791b30279eeb47d815d7767 — no row herea0229d5a613672b46a000c5b9925dd3a23c3e05914bb020b7f739c69cecbb5fe — no row here84e4cd1bcfc7954e7393230459ee9d98f7b9c39e0b29724e6b897bdb73f4ddcc — no row hereRead from public law and public agency files. A row missing here is missing from our sources, not from the law of the place. Check the cited source before relying on a value.