Passage Data · Cited limits by place
363 numeric limits and guidelines for phenol held for New Jersey and the place above it, from 14 instruments, each cited to its instrument, edition, section or page and quoted text. The register was built from 247 instruments. Everything held for New Jersey
The address to add: https://passage-data.com/mcp
https://passage-data.com/mcp.claude mcp add --transport http passage-data https://passage-data.com/mcp Then ask it, for example: “What are the phenol limits in New Jersey? Cite each one.”
For programs: this page as JSON at /api/v1/limits?parameter=phenol&place=US-NJ; the same at https://passage-data.com/mcp, a remote MCP server (tool find_limits). llms.txt · OpenAPI
| Parameter | Value | Unit | Statistic | Governs | Applies when | Cite |
|---|---|---|---|---|---|---|
| Phenol | 10,000(h) | µg/L | monthly average | surface water · guideline | receiving water: freshwater FW2 fresh waters (N.J.A.C. 7:9B-1.14(f)7 'Fresh Water (FW2) Criteria'; Pinelands fresh portions as FW2, 1.14(b)2ii) | N.J.A.C. 7:9B-1.14 — Surface Water Quality Standards, surface water quality criteria (New Jersey) N.J.A.C. 7:9B-1.14(f)7 (FW2 human health) · p. 41 |
| Phenol | 860,000(h) | µg/L | monthly average | surface water · guideline | receiving water: marine saline waters, SE (estuarine) and SC (coastal) classifications (1.14(f)7 'Saline Water (SE & SC) Criteria') | N.J.A.C. 7:9B-1.14 — Surface Water Quality Standards, surface water quality criteria (New Jersey) N.J.A.C. 7:9B-1.14(f)7 (SE & SC human health) · p. 41 |
| Parameter | Value | Unit | Statistic | Governs | Applies when | Cite |
|---|---|---|---|---|---|---|
| Phenol | 0.10 | Kg/kkg (or pounds per 1,000 lb) of wool | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.12 (BPT) Phenol 0.10 0.05 |
| Phenol | 0.05 | Kg/kkg (or pounds per 1,000 lb) of wool | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.12 (BPT) Phenol 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of wool | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.13 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of wool | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.13 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of wool | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.15 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of wool | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.15 (NSPS) Phenols 0.10 0.05 |
| Phenol | 0.14 | Kg/kkg (or pound per 1,000 lb) of fiber | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.22 (BPT) Phenol 0.14 0.07 |
| Phenol | 0.07 | Kg/kkg (or pound per 1,000 lb) of fiber | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.22 (BPT) Phenol 0.14 0.07 |
| Phenols | 0.14 | Kg/kkg (or pounds per 1,000 lb) of fiber | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.23 (BAT) Phenols 0.14 0.07 |
| Phenols | 0.07 | Kg/kkg (or pounds per 1,000 lb) of fiber | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.23 (BAT) Phenols 0.14 0.07 |
| Phenols | 0.14 | Kg/kkg (pounds per 1,000 lb) of fiber | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.25 (NSPS) Phenols 0.14 0.07 |
| Phenols | 0.07 | Kg/kkg (pounds per 1,000 lb) of fiber | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart B—Wool Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.25 (NSPS) Phenols 0.14 0.07 |
| Phenol | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.42 (BPT) Phenol 0.10 0.05 |
| Phenol | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.42 (BPT) Phenol 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pound per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.43 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pound per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.43 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Simple Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Simple Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Complex Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Complex Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Desizing | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart D—Woven Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Desizing | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.45 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.52 (BPT) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.52 (BPT) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.53 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.53 (BAT) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Simple Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Simple Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Complex Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Complex Manufacturing Operations | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.10 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Hosiery Products | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenols | 0.05 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart E—Knit Fabric Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): table: Hosiery Products | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.55 (NSPS) Phenols 0.10 0.05 |
| Phenol | 0.04 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.62 (BPT) Phenol 0.04 0.02 |
| Phenol | 0.02 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.62 (BPT) Phenol 0.04 0.02 |
| Phenols | 0.04 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.63 (BAT) Phenols 0.04 0.02 |
| Phenols | 0.02 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.63 (BAT) Phenols 0.04 0.02 |
| Phenols | 0.04 | kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory new sources (NSPS) Any new source subject to this subject must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.65 (NSPS) Phenols 0.04 0.02 |
| Phenols | 0.02 | kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart F—Carpet Finishing Subcategory new sources (NSPS) Any new source subject to this subject must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.65 (NSPS) Phenols 0.04 0.02 |
| Phenol | 0.12 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.72 (BPT) Phenol 0.12 0.06 |
| Phenol | 0.06 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.72 (BPT) Phenol 0.12 0.06 |
| Phenols | 0.12 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.73 (BAT) Phenols 0.12 0.06 |
| Phenols | 0.06 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.73 (BAT) Phenols 0.12 0.06 |
| Phenols | 0.12 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.75 (NSPS) Phenols 0.12 0.06 |
| Phenols | 0.06 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart G—Stock and Yarn Finishing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.75 (NSPS) Phenols 0.12 0.06 |
| Phenol | 0.023 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.82 (BPT) Phenol 0.023 0.011 |
| Phenol | 0.011 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.82 (BPT) Phenol 0.023 0.011 |
| Phenols | 0.023 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.83 (BAT) Phenols 0.023 0.011 |
| Phenols | 0.011 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.83 (BAT) Phenols 0.023 0.011 |
| Phenols | 0.023 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.85 (NSPS) Phenols 0.023 0.011 |
| Phenols | 0.011 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart H—Nonwoven Manufacturing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.85 (NSPS) Phenols 0.023 0.011 |
| Phenol | 0.22 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.92 (BPT) Phenol 0.22 0.11 |
| Phenol | 0.11 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.92 (BPT) Phenol 0.22 0.11 |
| Phenols | 0.22 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.93 (BAT) Phenols 0.22 0.11 |
| Phenols | 0.11 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory existing sources (BAT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.93 (BAT) Phenols 0.22 0.11 |
| Phenols | 0.22 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.95 (NSPS) Phenols 0.22 0.11 |
| Phenols | 0.11 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart I—Felted Fabric Processing Subcategory new sources (NSPS) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.95 (NSPS) Phenols 0.22 0.11 |
| Phenol | 26 | µg/L | daily maximum | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart I—Direct Discharge Point Sources That Use End-of-Pipe Biological Treatment existing sources (BAT) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal-bearing waste streams for the metals and times the flow from cyanide bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearin… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.91 (BAT) Phenol 26 15 |
| Phenol | 26 | µg/L | daily maximum | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart I—Direct Discharge Point Sources That Use End-of-Pipe Biological Treatment new sources (NSPS) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal-bearing waste streams for the metals and times the flow from cyanide bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearin… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.91 (NSPS) Phenol 26 15 |
| Phenol | 15 | µg/L | monthly average | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart I—Direct Discharge Point Sources That Use End-of-Pipe Biological Treatment existing sources (BAT) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal-bearing waste streams for the metals and times the flow from cyanide bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearin… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.91 (BAT) Phenol 26 15 |
| Phenol | 15 | µg/L | monthly average | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart I—Direct Discharge Point Sources That Use End-of-Pipe Biological Treatment new sources (NSPS) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal-bearing waste streams for the metals and times the flow from cyanide bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearin… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.91 (NSPS) Phenol 26 15 |
| Phenol | 47 | µg/L | daily maximum | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart J—Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment existing sources (BAT) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal bearing waste streams for the metals and times the cyanide-bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearing waste st… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.101 (BAT) Phenol 47 19 |
| Phenol | 47 | µg/L | daily maximum | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart J—Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment new sources (NSPS) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal bearing waste streams for the metals and times the cyanide-bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearing waste st… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.101 (NSPS) Phenol 47 19 |
| Phenol | 19 | µg/L | monthly average | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart J—Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment existing sources (BAT) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal bearing waste streams for the metals and times the cyanide-bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearing waste st… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.101 (BAT) Phenol 47 19 |
| Phenol | 19 | µg/L | monthly average | effluent · limit | (a) The provisions of this part are applicable to process wastewater discharges from all establishments or portions of establishments that manufacture the organic chemicals, plastics, and synthetic fibers (OCPSF) products or product groups covered by subparts B through H of this regulation and are i route: direct cites: 40 CFR 414 the discharge is of the Subpart J—Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment new sources (NSPS) (b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal bearing waste streams for the metals and times the cyanide-bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearing waste st… | 40 CFR Part 414 — PART 414—ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS 40 CFR 414.101 (NSPS) Phenol 47 19 |
| Phenols (4AAP) | 0.00451 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BPT) (a) By-product cokemaking—iron and steel. table: Subpart A | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.12 (BPT) Phenols (4AAP) 0.00451 0.00150 |
| Phenols (4AAP) | 0.00150 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BPT) (a) By-product cokemaking—iron and steel. table: Subpart A | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.12 (BPT) Phenols (4AAP) 0.00451 0.00150 |
| Phenols (4AAP) | 0.00481 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BPT) (b) By-product cokemaking—merchant. table: Subpart A | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.12 (BPT) Phenols (4AAP) 0.00481 0.00160 |
| Phenols (4AAP) | 0.00160 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BPT) (b) By-product cokemaking—merchant. table: Subpart A | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.12 (BPT) Phenols (4AAP) 0.00481 0.00160 |
| Phenols (4AAP) | 0.0000381 | Pounds per thousand lb of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BAT) (a) By-product cokemaking. table: Subpart A—Effluent Limitations (BAT) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.13 (BAT) Phenols (4AAP) 0.0000381 0.0000238 |
| Phenols (4AAP) | 0.0000238 | Pounds per thousand lb of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory existing sources (BAT) (a) By-product cokemaking. table: Subpart A—Effluent Limitations (BAT) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.13 (BAT) Phenols (4AAP) 0.0000381 0.0000238 |
| Phenols (4AAP) | 0.0000381 | Pounds per thousand lb of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory new sources (NSPS) (2) The following standards apply with respect to each new source that commences construction after November 18, 2002: table: Subpart A—New Source Performance Standards (NSPS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.14 (NSPS) Phenols (4AAP) 0.0000381 0.0000238 |
| Phenols (4AAP) | 0.0000238 | Pounds per thousand lb of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart A—Cokemaking Subcategory new sources (NSPS) (2) The following standards apply with respect to each new source that commences construction after November 18, 2002: table: Subpart A—New Source Performance Standards (NSPS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.14 (NSPS) Phenols (4AAP) 0.0000381 0.0000238 |
| Phenols (4AAP) | 0.000100 | Pounds per thousand lb of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory existing sources (BAT) (a) Sintering operations with wet air pollution control system. The following table presents BAT limitations for sintering operations with wet air pollution control systems: table: Subpart B—Effluent Limitations (BAT) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.23 (BAT) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.0000501 | Pounds per thousand lb of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory existing sources (BAT) (a) Sintering operations with wet air pollution control system. The following table presents BAT limitations for sintering operations with wet air pollution control systems: table: Subpart B—Effluent Limitations (BAT) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.23 (BAT) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.000100 | Pounds per thousand lb of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory new sources (NSPS) (1) Sintering operations with wet air pollution control system. The following table presents NSPS for sintering operations with wet air pollution control systems: table: Subpart B—New Source Performance Standards (NSPS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.24 (NSPS) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.0000501 | Pounds per thousand lb of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory new sources (NSPS) (1) Sintering operations with wet air pollution control system. The following table presents NSPS for sintering operations with wet air pollution control systems: table: Subpart B—New Source Performance Standards (NSPS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.24 (NSPS) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.000100 | Pounds per thousand lb of product | daily maximum | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory existing sources (PSES) (a) Sintering operations with wet air pollution control system. The following table presents PSES for sintering operations with wet air pollution control systems: table: Subpart B—Pretreatment Standards for Existing Sources (PSES) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.25 (PSES) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.0000501 | Pounds per thousand lb of product | monthly average | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory existing sources (PSES) (a) Sintering operations with wet air pollution control system. The following table presents PSES for sintering operations with wet air pollution control systems: table: Subpart B—Pretreatment Standards for Existing Sources (PSES) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.25 (PSES) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.000100 | Pounds per thousand pound of product | daily maximum | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory new sources (PSNS) table: Subpart B—Pretreatment Standards for New Sources (PSNS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.26 (PSNS) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.0000501 | Pounds per thousand pound of product | monthly average | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart B—Sintering Subcategory new sources (PSNS) table: Subpart B—Pretreatment Standards for New Sources (PSNS) | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.26 (PSNS) Phenols (4AAP) 2 0.000100 0.0000501 |
| Phenols (4AAP) | 0.00626 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (BPT) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.32 (BPT) Phenols (4AAP) 0.00626 0.00210 |
| Phenols (4AAP) | 0.00210 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (BPT) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.32 (BPT) Phenols (4AAP) 0.00626 0.00210 |
| Phenols (4AAP) | 0.0000584 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (BAT) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.33 (BAT) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000292 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (BAT) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.33 (BAT) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000584 | Kg/kkg (pounds per 1,000 lb) of products | daily maximum | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory new sources (NSPS) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.34 (NSPS) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000292 | Kg/kkg (pounds per 1,000 lb) of products | monthly average | effluent · limit | route: direct cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory new sources (NSPS) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.34 (NSPS) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000584 | Kg/kkg (pounds per 1,000 lb) of products | daily maximum | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (PSES) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.35 (PSES) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000292 | Kg/kkg (pounds per 1,000 lb) of products | monthly average | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (PSES) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.35 (PSES) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.000175 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (PSES) (c) Existing indirect dischargers. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.35 (PSES) Phenols (4AAP) 0.000175 0.0000584 |
| Phenols (4AAP) | 0.0000584 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory existing sources (PSES) (c) Existing indirect dischargers. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.35 (PSES) Phenols (4AAP) 0.000175 0.0000584 |
| Phenols (4AAP) | 0.0000584 | Kg/kkg (pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory new sources (PSNS) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.36 (PSNS) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols (4AAP) | 0.0000292 | Kg/kkg (pounds per 1,000 lb) of product | monthly average | effluent · limit | route: sewer cites: 40 CFR 420 the discharge is of the Subpart C—Ironmaking Subcategory new sources (PSNS) (a) Iron blast furnace. table: Subpart C | 40 CFR Part 420 — PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 420.36 (PSNS) Phenols (4AAP) 0.0000584 0.0000292 |
| Phenols | .006 | kg/Mwh | daily maximum | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory existing sources (BPT) | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.22 (BPT) Phenols .006 .004 |
| Phenols | .004 | kg/Mwh | monthly average | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory existing sources (BPT) | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.22 (BPT) Phenols .006 .004 |
| Phenols | .0004 | kg/Mwh | daily maximum | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.23 (BAT) Phenols .0004 .0002 |
| Phenols | .0002 | kg/Mwh | monthly average | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.23 (BAT) Phenols .0004 .0002 |
| Phenols | .0004 | kg/Mwh | daily maximum | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.25 (NSPS) Phenols .0004 .0002 |
| Phenols | .0002 | kg/Mwh | monthly average | effluent · limit | route: direct cites: 40 CFR 424 the discharge is of the Subpart B—Covered Electric Furnaces and Other Smelting Operations With Wet Air Pollution Control Devices Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 424 — PART 424—FERROALLOY MANUFACTURING POINT SOURCE CATEGORY 40 CFR 424.25 (NSPS) Phenols .0004 .0002 |
| Phenol | 0.0006 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 426 the discharge is of the Subpart A—Insulation Fiberglass Subcategory existing sources (BPT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged in process waste water from advanced air emission control devices, when such water cannot be consumed in the process. | 40 CFR Part 426 — PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 426.12 (BPT) Phenol 0.0006 0.0003 |
| Phenol | 0.0003 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 426 the discharge is of the Subpart A—Insulation Fiberglass Subcategory existing sources (BPT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged in process waste water from advanced air emission control devices, when such water cannot be consumed in the process. | 40 CFR Part 426 — PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 426.12 (BPT) Phenol 0.0006 0.0003 |
| Phenols | 2.18 | kg/1000 cu m of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 429 the discharge is of the Subpart G—Wood Preserving Steam Subcategory existing sources (BPT) table: Subpart G | 40 CFR Part 429 — PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY 40 CFR 429.81 (BPT) Phenols 2.18 .65 |
| Phenols | .65 | kg/1000 cu m of product | monthly average | effluent · limit | route: direct cites: 40 CFR 429 the discharge is of the Subpart G—Wood Preserving Steam Subcategory existing sources (BPT) table: Subpart G | 40 CFR Part 429 — PART 429—TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY 40 CFR 429.81 (BPT) Phenols 2.18 .65 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart C—Organics Treatment and Recovery existing sources (BPT) table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.31 (BPT) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart C—Organics Treatment and Recovery existing sources (BPT) table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.31 (BPT) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (b) Combined waste receipts from subparts A, B, and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (b) Combined waste receipts from subparts A, B, and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (e) Combined waste receipts from subparts B and C of this part. As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams existing sources (BPT) (e) Combined waste receipts from subparts B and C of this part. As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT: table: BPT Limitations | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.42 (BPT) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 3.65 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (e) Combined waste receipts from subparts B and C of this part. As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 1.08 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 437 the discharge is of the Subpart D—Multiple Wastestreams new sources (NSPS) (e) Combined waste receipts from subparts B and C of this part. As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards: table: Performance Standards | 40 CFR Part 437 — PART 437—THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY 40 CFR 437.45 (NSPS) Phenol 3.65 1.08 |
| Phenol | 0.05 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 439 the discharge is of the Subpart A—Fermentation Products existing sources (BAT) table: Effluent Limitations (BAT) | 40 CFR Part 439 — PART 439—PHARMACEUTICAL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 439.14 (BAT) Phenol 0.05 0.02 |
| Phenol | 0.02 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 439 the discharge is of the Subpart A—Fermentation Products existing sources (BAT) table: Effluent Limitations (BAT) | 40 CFR Part 439 — PART 439—PHARMACEUTICAL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 439.14 (BAT) Phenol 0.05 0.02 |
| Phenol | 0.05 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 439 the discharge is of the Subpart A—Fermentation Products new sources (NSPS) (a) Any new source subject to this subpart must achieve the following standards: table: Performance Standards (NSPS) | 40 CFR Part 439 — PART 439—PHARMACEUTICAL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 439.15 (NSPS) Phenol 0.05 0.02 |
| Phenol | 0.02 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 439 the discharge is of the Subpart A—Fermentation Products new sources (NSPS) (a) Any new source subject to this subpart must achieve the following standards: table: Performance Standards (NSPS) | 40 CFR Part 439 — PART 439—PHARMACEUTICAL MANUFACTURING POINT SOURCE CATEGORY 40 CFR 439.15 (NSPS) Phenol 0.05 0.02 |
| Phenol | 0.048 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 445 the discharge is of the Subpart A—RCRA Subtitle C Hazardous Waste Landfill existing sources (BPT) table: Effluent Limitations | 40 CFR Part 445 — PART 445—LANDFILLS POINT SOURCE CATEGORY 40 CFR 445.11 (BPT) Phenol 0.048 0.029 |
| Phenol | 0.029 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 445 the discharge is of the Subpart A—RCRA Subtitle C Hazardous Waste Landfill existing sources (BPT) table: Effluent Limitations | 40 CFR Part 445 — PART 445—LANDFILLS POINT SOURCE CATEGORY 40 CFR 445.11 (BPT) Phenol 0.048 0.029 |
| Phenol | 0.026 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 445 the discharge is of the Subpart B—RCRA Subtitle D Non-Hazardous Waste Landfill existing sources (BPT) table: Effluent Limitations | 40 CFR Part 445 — PART 445—LANDFILLS POINT SOURCE CATEGORY 40 CFR 445.21 (BPT) Phenol 0.026 0.015 |
| Phenol | 0.015 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 445 the discharge is of the Subpart B—RCRA Subtitle D Non-Hazardous Waste Landfill existing sources (BPT) table: Effluent Limitations | 40 CFR Part 445 — PART 445—LANDFILLS POINT SOURCE CATEGORY 40 CFR 445.21 (BPT) Phenol 0.026 0.015 |
| Total Phenols | 0.0074 | kg/1,000 kkg (pounds per million pounds) of metal poured | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (c) Die Casting Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.0026 | kg/1,000 kkg (pounds per million pounds) of metal poured | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (c) Die Casting Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.0017 | kg/1,000 kkg (pounds per million pounds) of metal poured | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.258 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (d) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.258 0.09 |
| Total Phenols | 0.09 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (d) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.258 0.09 |
| Total Phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0601 |
| Total Phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0601 |
| Total Phenols | 0.0601 | kg/62.3 million SM 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total Phenols 0.86 0.3 0.0601 |
| Total phenols | 3.36 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (g) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total phenols 3.36 1.17 |
| Total phenols | 1.17 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (g) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total phenols 3.36 1.17 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.781 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BPT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.12 (BPT) Total phenols 0.86 0.3 0.781 |
| Total Phenols | 0.0074 | kg/1,000 kkg (pounds per million pounds) of metal poured | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (c) Die Casting Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.0026 | kg/1,000 kkg (pounds per million pounds) of metal poured | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (c) Die Casting Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.0017 | kg/1,000 kkg (pounds per million pounds) of metal poured | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0017 |
| Total Phenols | 0.258 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (d) Dust Collection Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.258 0.09 |
| Total Phenols | 0.09 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (d) Dust Collection Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.258 0.09 |
| Total Phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0601 |
| Total Phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0601 |
| Total Phenols | 0.0601 | kg/62.3 million Sm 3 (lb per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total Phenols 0.86 0.3 0.0601 |
| Total phenols | 3.36 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (g) Melting Furnace Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total phenols 3.36 1.17 |
| Total phenols | 1.17 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (g) Melting Furnace Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total phenols 3.36 1.17 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.781 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (BAT) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.13 (BAT) Total phenols 0.86 0.3 0.781 |
| Total Phenols | 0.0074 | kg/1,000 kkg (pounds per million pounds) of metal poured | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (c) Die Casting Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total Phenols 0.0074 0.0026 | |
| Total Phenols | 0.0026 | kg/1,000 kkg (pounds per million pounds) of metal poured | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (c) Die Casting Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total Phenols 0.0074 0.0026 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0017 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0017 |
| Total phenols | 0.0017 | kg/1,000 kkg (pounds per million pounds) of metal poured | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (c) Die Casting Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0017 |
| Total phenols | 0.258 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (d) Dust Collection Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.258 0.09 |
| Total phenols | 0.09 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (d) Dust Collection Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.258 0.09 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0601 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0601 |
| Total phenols | 0.0601 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (d) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.0601 |
| Total phenols | 3.36 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (g) Melting Furnace Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 3.36 1.17 |
| Total phenols | 1.17 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (g) Melting Furnace Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 3.36 1.17 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.781 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (NSPS) (g) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.14 (NSPS) Total phenols 0.86 0.3 0.781 |
| Total phenols | 0.0074 | kg/1,000 kkg (pounds per million pounds) of metal poured | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (c) Die Casting Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 0.0074 0.0026 |
| Total phenols | 0.0026 | kg/1,000 kkg (pounds per million pounds) of metal poured | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (c) Die Casting Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 0.0074 0.0026 |
| Total phenols | 0.258 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (d) Dust Collection Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 0.258 0.09 |
| Total phenols | 0.09 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (d) Dust Collection Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 0.258 0.09 |
| Total phenols | 3.36 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (g) Melting Furnace Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 3.36 1.17 |
| Total phenols | 1.17 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory existing sources (PSES) (g) Melting Furnace Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.15 (PSES) Total phenols 3.36 1.17 |
| Total Phenols | 0.0074 | kg/1,000 kkg (pounds per million pounds) of metal poured | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (c) Die Casting Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.0026 | kg/1,000 kkg (pounds per million pounds) of metal poured | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (c) Die Casting Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 0.0074 0.0026 |
| Total Phenols | 0.258 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (d) Dust Collection Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 0.258 0.09 |
| Total Phenols | 0.09 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (d) Dust Collection Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 0.258 0.09 |
| Total Phenols | 3.36 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (g) Melting Furnace Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 3.36 1.17 |
| Total Phenols | 1.17 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart A—Aluminum Casting Subcategory new sources (PSNS) (g) Melting Furnace Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.16 (PSNS) Total Phenols 3.36 1.17 |
| Total phenols | 0.617 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.617 0.215 |
| Total phenols | 0.215 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.617 0.215 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.144 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 2.02 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 2.02 0.706 |
| Total phenols | 0.706 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 2.02 0.706 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.467 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.467 |
| Total phenols | 0.467 | kg/62.3 million Sm 3 (pound per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.22 (BPT) Total phenols 0.86 0.3 0.467 |
| Total phenols | 0.617 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.617 0.215 |
| Total phenols | 0.215 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.617 0.215 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.144 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.144 |
| Total phenols | 2.02 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 2.02 0.706 |
| Total phenols | 0.706 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 2.02 0.706 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.471 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.23 (BAT) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.617 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (c) Dust Collection Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.617 0.215 |
| Total phenols | 0.215 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (c) Dust Collection Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.617 0.215 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.144 |
| Total phenols | 0.144 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.144 |
| Total phenols | 2.02 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (f) Melting Furnace Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 2.02 0.706 |
| Total phenols | 0.706 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (f) Melting Furnace Scrubber Operations. table: NSPS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 2.02 0.706 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.471 | kg/62.3 Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (NSPS) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.24 (NSPS) Total phenols 0.86 0.3 0.471 |
| Total phenols | 0.617 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (PSES) (c) Dust Collection Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.25 (PSES) Total phenols 0.617 0.215 |
| Total phenols | 0.215 | kg/62.3 million Sm (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (PSES) (c) Dust Collection Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.25 (PSES) Total phenols 0.617 0.215 |
| Total phenols | 2.02 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (PSES) (f) Melting Furnace Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.25 (PSES) Total phenols 2.02 0.706 |
| Total phenols | 0.706 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory existing sources (PSES) (f) Melting Furnace Scrubber Operations. table: PSES | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.25 (PSES) Total phenols 2.02 0.706 |
| Total Phenols | 0.617 | kg/62.3 Million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (PSNS) (c) Dust Collection Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.26 (PSNS) Total Phenols 0.617 0.215 |
| Total Phenols | 0.215 | kg/62.3 Million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (PSNS) (c) Dust Collection Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.26 (PSNS) Total Phenols 0.617 0.215 |
| Total Phenols | 2.02 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (PSNS) (f) Melting Furnace Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.26 (PSNS) Total Phenols 2.02 0.706 |
| Total Phenols | 0.706 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: sewer cites: 40 CFR 464 the discharge is of the Subpart B—Copper Casting Subcategory new sources (PSNS) (f) Melting Furnace Scrubber Operations. table: PSNS | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.26 (PSNS) Total Phenols 2.02 0.706 |
| Total phenols | 0.656 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.656 0.225 |
| Total phenols | 0.225 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.656 0.225 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.15 | mg/L | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (c) Dust Collection Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 3.01 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 3.01 1.05 |
| Total phenols | 1.05 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 3.01 1.05 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.701 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.701 |
| Total phenols | 0.701 | kg/62.3 million Sm 3 (pounds per billion SCF) or air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (f) Melting Furnace Scrubber Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.701 |
| Total phenols | 0.642 | kg/1,000 kkg (pounds per million pounds) of sand reclaimed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (i) Wet Sand Reclamation Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.642 0.224 |
| Total phenols | 0.224 | kg/1,000 kkg (pounds per million pounds) of sand reclaimed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (i) Wet Sand Reclamation Operations. table: BPT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.642 0.224 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (i) Wet Sand Reclamation Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.149 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (i) Wet Sand Reclamation Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.149 |
| Total phenols | 0.149 | kg/1,000 kkg (pounds per million pounds) of sand reclaimed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BPT) (i) Wet Sand Reclamation Operations. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.32 (BPT) Total phenols 0.86 0.3 0.149 |
| Total phenols | 0.646 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.646 0.225 |
| Total phenols | 0.225 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.646 0.225 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.15 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (c) Dust Collection Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.656 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (2) Applicable to plants that are casting primarily steel and to plants that are casting primarily malleable iron where equal to or less than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.656 0.225 |
| Total phenols | 0.225 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (2) Applicable to plants that are casting primarily steel and to plants that are casting primarily malleable iron where equal to or less than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.656 0.225 |
| Total phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (2) Applicable to plants that are casting primarily steel and to plants that are casting primarily malleable iron where equal to or less than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (2) Applicable to plants that are casting primarily steel and to plants that are casting primarily malleable iron where equal to or less than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total phenols | 0.15 | kg/62.3 million Sm 3 (pounds per billion SCF) of air scrubbed | annual average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (2) Applicable to plants that are casting primarily steel and to plants that are casting primarily malleable iron where equal to or less than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total phenols 0.86 0.3 0.15 |
| Total Phenols | 3.01 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total Phenols 3.01 1.05 |
| Total Phenols | 1.05 | kg/62.3 million Sm³ (pounds per billion SCF) of air scrubbed | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. table: BAT Effluent Limitations | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total Phenols 3.01 1.05 |
| Total Phenols | 0.86 | mg/L | daily maximum | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total Phenols 0.86 0.3 0.701 |
| Total Phenols | 0.3 | mg/L | monthly average | effluent · limit | route: direct cites: 40 CFR 464 the discharge is of the Subpart C—Ferrous Casting Subcategory existing sources (BAT) (f) Melting Furnace Scrubber Operations. (1) Applicable to plants that are casting primarily ductile or gray iron and to plants that are casting primarily malleable iron where greater than 3,557 tons of metal are poured per year. | 40 CFR Part 464 — PART 464—METAL MOLDING AND CASTING POINT SOURCE CATEGORY 40 CFR 464.33 (BAT) Total Phenols 0.86 0.3 0.701 |
This page shows the first 250 of 363 rows, New Jersey's own first. All of them, as JSON 200 at a time: 1–200 · 201–363
Not held here: a discharge permit's own limits, and any rule for phenol outside the 67 instruments we hold for this place and the places above it. A row missing here is missing from our sources, not from the law.
Free check: send your permit or your lab results, and we check each number against these rows, every verdict cited to its page, by email within 5 business days. Or send the link to a rule we do not hold: we read it and cite it by page.
Every instrument we hold for New Jersey (US-NJ) and the place above it, United States (US): 67 instruments, for every parameter name matching “phenol”: phenol. 104 other names contain "phenol" (82 parameters, over the 40 searched at once): ask for one of them by name.
940c0585603141d76af0790879f64c667489809aac317d090485198f492a1311 — 230 rows here02c53988595c9f2911727f635f59f6a2af0c1d50ce06550c150a706321a505b3 — 56 rows here15d00b2386811ecfdcc8334d57defe2f690d2f88798390abff59228c5aea1898 — 28 rows here8e0e010c4a042c3d2350a03bd7a7c8a98559afa3a2ffa45a702685c0621afd01 — 14 rows here8652d1f3d1271a60d9c07a11c5e00c0c1e23da3fb57f25d86e40b9a487b25608 — 8 rows hereb9ba02c4f274d6907407c320e0fcce140e72aa79cf2e81ae80ae804f723e7bed — 6 rows here109ea8c5ee22a37622c2aa91dd21d79e528a5f9f3e9d01ecc8dc18c25b6afd9e — 4 rows here0d9785d9dc37e256a6ea799566e33681f123b092975ccaaa01967665080b1598 — 4 rows herea0229d5a613672b46a000c5b9925dd3a23c3e05914bb020b7f739c69cecbb5fe — 3 rows here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — 3 rows herea824cc1c96559e03e9d0013c6dc961092352baafce6b5daec6be1d3c9ef96c4f — 2 rows here8ffc3a5ae0e6c7d8e929b9201225a003c95d5c0e6a73ed549ae0ef4bb94b22ed — 2 rows here15d9d3d664a4afb37ce62a7b0bdc68c5f3001a6f17b0b5a0bb0991af9b78ce7d — 2 rows here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — 1 row here9f178f66686e289aea4d4961eee13479c15774e48d25aea14710655d2aeb18f7 — no row hereaa9ac14c0ef8e5cffe6bfb5a5368ab853aa9128404ac004a3de7bc0bab0c24bd — no row here28dbdea077be653555fa562c999b78c741237e57d5b8efc8606d183ce33279da — no row here56de9012822853c75f8513babf1c1440ff957ff2145a12ec8ef5c1906da02f2d — no row here39a50407f4cd89036e245861437f7961e58a8451efaa9fd6330ff45d381fa205 — no row here69910d7277f8067273b796c1905c6283621bc7c72723b388bab9b5c8f7983742 — no row here14a34390b41a1060c6d5d7ede5e6018f118680d1cb54643b81fa9b50abea37c4 — no row here2b162dead6acf77f69bd8a2a79a6195c30a6f7a6c82e29ec4754657603f1202d — no row here9c6c38baf048e0e1ed5f2c05df397ea581d48822b23c4b294e52b960b2d547f9 — no row hereebf67428a51e85f12785b92d537e6878c5f9838c87722ac2db82b3db673d1e23 — no row here4b5bd5a797a31a077d5a797de292aab3ed4938bf350995c3877c393d3c1f8428 — no row here881822302cd9912ec4678ba7ccaa00276ff06f33a48ae154f399db6986c1ffda — no row here3bac23cae59f82ac6f96310d28b2d8904c650932053de79f037f6d4f6d3db849 — no row hered7cfd73b5bcf0e961e02ec53264492b2371277280003192841b7166b2a5012cf — no row here5b10885a56878a0a10277b8fdf945441e570a9316098995bb3f948e5bc5a52d9 — no row here60cadc14b8fc25c39238a9d55cede55743d6b349ca20c8f8158b0f7e5d98fd64 — no row here9984c22aee31f14ac6cc89b6895db16ce8ed6cdc39abf66752529e44a86fda45 — no row here2aa1dbe8158371fa4360d0df2412ad8b47c124aab4173316b854dc9c06d9161a — no row herecb5058a08c9472074411dfb00b10ae90efb4763be56c41b6c33d5fec477a555b — no row here6ee241b7ee9a78250fccd4d4134366c8ccc74eceba4512675bc5db8a5be24cc5 — no row here3b1a8b869cb040029bdcb18f0ff232995cfc9774f16112f5700bb1f5cb31daa4 — no row heree30d763aa2bf49914b8b02364329ed662c0af2bc1ac6ee13233ee65c1499a94e — no row here59437ebfad1a7c3090dc8f3f11eac33d1cfa8c81e44baf92b3fcbfc75b584c19 — no row heree485b5e90afd26961e2964355f78ce1d1a1781ac67e588a9f2ea6fd1ad913db2 — no row here699f842280ca1f65a56712a21ad9906bb9d709f20624757e72df02c7f695e73e — no row here23be7bb993614d9248cff594a196b782587671393fc7b4f445eab69876b224d8 — no row hereaea3b68c1fc9aac4ea3fa56240df79cf606e97c278fd0b499c3ec190dad2ee9a — no row here9330b2255a5f7e74daf9175af898d9d28ae855a2560f50658d1bce4c6b8feded — no row here4f4bb5077485ea6f8a27e678219c7400c18be7ca7824e5b21d1996399098cbc4 — no row hereb8df51b8c9ab0f6d765b07cb267f1aead5f9a257b5d9d914fb34511c1433a9bd — no row hereb5d02b5c87984639aaff6e500a6930c9e7b478cec825c013f26c72f715e32a0e — no row here07ce62c90f736e9aacb3b93854b6861d2d14ec3c7ed85146da489eb46ca5ebca — no row here6abcaec659f7bd98f5861813fc76e8a2f027753ba5488ec0da9540b3dff013a2 — no row hereca4f7d499465d74e9f9e97bbad32419b9e4d71c107bd17c21ec9348b86c19167 — no row here36066b7d5702811c70e1498b6ff9647599f1a883a18bd95449abc5900832e375 — no row here5903548fcfa58a4b6152d41cd1399b4c82e3684e69d5ea20a0fb89c1b71e4329 — no row here904434c6e85600060669580acf042d53f5e711e3313e8aef038d9c60b244a740 — no row here465264d203dabbec52b8a9e5afc03c9b9140c4f1758d0f5cf422a0df03d3cce3 — no row heree78d4825199d5ba2cf468f744603f403b7dbddbe3321955e6a0b1e344de50d7f — no row heree9b2ea900bfea837890cb559b8db71416882d7666c81b683b11bdc700efb7b50 — no row here83f54e1a9420fdb3abe9a4e4e8edd2060bbc0c5e0067824488d3f0f1cc50d328 — no row here817c320835fb2f9cbb5e6218efb2f5cdcb0b0527933ae87d5a3976f0981127fd — no row here4a4e95e44a16b28b58efce43eca3878d712f9aaf1b73e5c36c783cc12c9bc06b — no row here4b59a142f54a91aef8356c2f3c507cc96e171e01344aa388d2f55e6832ed2925 — no row here3a0399ddea806eb34f0fe9b3c15efa97679757f340a125b4af5fdc234a93fe6c — no row here4fcd842aa8d4463c015d5dc67a32412a7c554ad425715bb2375e64800bf4e7bd — no row here2133233aad39c4df1dfd22825d228cb8ca25365a51aadadb9aacb46241c2ceea — no row here857e290109cd8028b70b239ab2b16e9c5d068a71e557a7c419ebba4dee2c40b4 — no row herec69109252c9521cd31b45755731369a860bb1282c273dea5fd6903836effa7c7 — no row herebd534eb2d8af38e141e1cd6236134a638298fbf14791b30279eeb47d815d7767 — no row herebe6b429558db9852c3456eb22c17046aa1a3335ee89e702e8afb793f9b5b25ec — no row herea98e8b66948f546c71e119055eff012e6380857a255ec216a4247b658bcf040d — no row hereRead from public law and public agency files. A row missing here is missing from our sources, not from the law of the place. Check the cited source before relying on a value.