Passage Data · Cited limits by place
2,453 numeric limits and guidelines for oil and grease (alternate monitoring parameter) held for Indiana and the place above it, from 26 instruments, each cited to its instrument, edition, section or page and quoted text. The register was built from 247 instruments. Everything held for Indiana
The address to add: https://passage-data.com/mcp
https://passage-data.com/mcp.claude mcp add --transport http passage-data https://passage-data.com/mcp Then ask it, for example: “What are the oil and grease (alternate monitoring parameter) limits in Indiana? Cite each one.”
For programs: this page as JSON at /api/v1/limits?parameter=oil%20and%20grease%20alternate%20monitoring%20parameter&place=US-IN; the same at https://passage-data.com/mcp, a remote MCP server (tool find_limits). llms.txt · OpenAPI
The one instrument we hold for Indiana (US-IN) has no row for oil and grease (alternate monitoring parameter). The rows below are from the place above it, which we search too.
| Parameter | Value | Unit | Statistic | Governs | Applies when | Cite |
|---|---|---|---|---|---|---|
| Oil and grease | 10 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart A—Farm-Raised Catfish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.12 (BPT) Oil and grease 10 3.4 |
| Oil and grease | 3.4 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart A—Farm-Raised Catfish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.12 (BPT) Oil and grease 10 3.4 |
| Oil and grease | 0.90 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart A—Farm-Raised Catfish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.15 (NSPS) Oil and grease 0.90 0.45 |
| Oil and grease | 0.45 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart A—Farm-Raised Catfish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.15 (NSPS) Oil and grease 0.90 0.45 |
| Oil and grease | 0.60 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart B—Conventional Blue Crab Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.22 (BPT) Oil and grease 0.60 0.20 |
| Oil and grease | 0.20 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart B—Conventional Blue Crab Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.22 (BPT) Oil and grease 0.60 0.20 |
| Oil and grease | 0.13 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart B—Conventional Blue Crab Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.25 (NSPS) Oil and grease 0.13 0.065 |
| Oil and grease | 0.065 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart B—Conventional Blue Crab Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.25 (NSPS) Oil and grease 0.13 0.065 |
| Oil and grease | 13 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart C—Mechanized Blue Crab Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.32 (BPT) Oil and grease 13 4.2 |
| Oil and grease | 4.2 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart C—Mechanized Blue Crab Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.32 (BPT) Oil and grease 13 4.2 |
| Oil and grease | 2.6 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart C—Mechanized Blue Crab Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.35 (NSPS) Oil and grease 2.6 1.3 |
| Oil and grease | 1.3 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart C—Mechanized Blue Crab Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.35 (NSPS) Oil and grease 2.6 1.3 |
| Oil and grease | 1.8 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart D—Non-Remote Alaskan Crab Meat Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.42 (BPT) Oil and grease 1.8 0.61 |
| Oil and grease | 0.61 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart D—Non-Remote Alaskan Crab Meat Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.42 (BPT) Oil and grease 1.8 0.61 |
| Oil and grease | 1.6 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart D—Non-Remote Alaskan Crab Meat Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.45 (NSPS) Oil and grease 1.6 0.52 |
| Oil and grease | 0.52 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart D—Non-Remote Alaskan Crab Meat Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.45 (NSPS) Oil and grease 1.6 0.52 |
| Oil and grease | 1.3 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart F—Non-Remote Alaskan Whole Crab and Crab Section Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.62 (BPT) Oil and grease 1.3 0.42 |
| Oil and grease | 0.42 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart F—Non-Remote Alaskan Whole Crab and Crab Section Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.62 (BPT) Oil and grease 1.3 0.42 |
| Oil and grease | 1.1 | Metric units (kg/kkg of seafood— | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart F—Non-Remote Alaskan Whole Crab and Crab Section Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.65 (NSPS) Oil and grease 1.1 0.36 |
| Oil and grease | 0.36 | Metric units (kg/kkg of seafood— | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart F—Non-Remote Alaskan Whole Crab and Crab Section Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.65 (NSPS) Oil and grease 1.1 0.36 |
| Oil and grease | 1.8 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart H—Dungeness and Tanner Crab Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.82 (BPT) Oil and grease 1.8 0.61 |
| Oil and grease | 0.61 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart H—Dungeness and Tanner Crab Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.82 (BPT) Oil and grease 1.8 0.61 |
| Oil and grease | 0.25 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart H—Dungeness and Tanner Crab Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.85 (NSPS) Oil and grease 0.25 0.10 |
| Oil and grease | 0.10 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart H—Dungeness and Tanner Crab Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.85 (NSPS) Oil and grease 0.25 0.10 |
| Oil and grease | 51 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart I—Non-Remote Alaskan Shrimp Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.92 (BPT) Oil and grease 51 17 |
| Oil and grease | 17 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart I—Non-Remote Alaskan Shrimp Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.92 (BPT) Oil and grease 51 17 |
| Oil and grease | 45 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart I—Non-Remote Alaskan Shrimp Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.95 (NSPS) Oil and grease 45 15 |
| Oil and grease | 15 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart I—Non-Remote Alaskan Shrimp Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.95 (NSPS) Oil and grease 45 15 |
| Oil and grease | 126 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart K—Northern Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.112 (BPT) Oil and grease 126 42 |
| Oil and grease | 42 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart K—Northern Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.112 (BPT) Oil and grease 126 42 |
| Oil and grease | 14 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart K—Northern Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.115 (NSPS) Oil and grease 14 5.7 |
| Oil and grease | 5.7 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart K—Northern Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.115 (NSPS) Oil and grease 14 5.7 |
| Oil and grease | 36 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart L—Southern Non-Breaded Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.122 (BPT) Oil and grease 36 12 |
| Oil and grease | 12 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart L—Southern Non-Breaded Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.122 (BPT) Oil and grease 36 12 |
| Oil and grease | 4.0 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart L—Southern Non-Breaded Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.125 (NSPS) Oil and grease 4.0 1.6 |
| Oil and grease | 1.6 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart L—Southern Non-Breaded Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.125 (NSPS) Oil and grease 4.0 1.6 |
| Oil and grease | 36 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart M—Breaded Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.132 (BPT) Oil and grease 36 12 |
| Oil and grease | 12 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart M—Breaded Shrimp Processing in the Contiguous States Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.132 (BPT) Oil and grease 36 12 |
| Oil and grease | 3.8 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart M—Breaded Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.135 (NSPS) Oil and grease 3.8 1.5 |
| Oil and grease | 1.5 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart M—Breaded Shrimp Processing in the Contiguous States Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.135 (NSPS) Oil and grease 3.8 1.5 |
| Oil and grease | 2.1 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart N—Tuna Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.142 (BPT) Oil and grease 2.1 0.84 |
| Oil and grease | 0.84 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart N—Tuna Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.142 (BPT) Oil and grease 2.1 0.84 |
| Oil and grease | 1.9 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart N—Tuna Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.145 (NSPS) Oil and grease 1.9 0.76 |
| Oil and grease | 0.76 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart N—Tuna Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.145 (NSPS) Oil and grease 1.9 0.76 |
| Oil and grease | 1.4 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory existing sources (BPT) (a) Any menhaden or anchovy fish meal reduction facility which utilizes a solubles plant to process stick water or bail water shall meet the following limitations. | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.152 (BPT) Oil and grease 1.4 0.76 |
| Oil and grease | 0.76 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory existing sources (BPT) (a) Any menhaden or anchovy fish meal reduction facility which utilizes a solubles plant to process stick water or bail water shall meet the following limitations. | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.152 (BPT) Oil and grease 1.4 0.76 |
| Oil and grease | 3.2 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory existing sources (BPT) (b) Any menhaden or anchovy fish meal reduction facility not covered under § 408.152(a) shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.152 (BPT) Oil and grease 3.2 1.4 |
| Oil and grease | 1.4 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory existing sources (BPT) (b) Any menhaden or anchovy fish meal reduction facility not covered under § 408.152(a) shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.152 (BPT) Oil and grease 3.2 1.4 |
| Oil and grease | 1.4 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.155 (NSPS) Oil and grease 1.4 0.76 |
| Oil and grease | 0.76 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart O—Fish Meal Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.155 (NSPS) Oil and grease 1.4 0.76 |
| Oil and grease | 0.31 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart P—Alaskan Hand-Butchered Salmon Processing Subcategory existing sources (BPT) (a) Any hand-butchered salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.162 (BPT) Oil and grease 0.31 0.19 |
| Oil and grease | 0.19 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart P—Alaskan Hand-Butchered Salmon Processing Subcategory existing sources (BPT) (a) Any hand-butchered salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.162 (BPT) Oil and grease 0.31 0.19 |
| Oil and grease | 0.28 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart P—Alaskan Hand-Butchered Salmon Processing Subcategory new sources (NSPS) (1) Any hand-butchered salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.165 (NSPS) Oil and grease 0.28 0.17 |
| Oil and grease | 0.17 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart P—Alaskan Hand-Butchered Salmon Processing Subcategory new sources (NSPS) (1) Any hand-butchered salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.165 (NSPS) Oil and grease 0.28 0.17 |
| Oil and grease | 29 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Q—Alaskan Mechanized Salmon Processing Subcategory existing sources (BPT) (a) Any mechanized salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.172 (BPT) Oil and grease 29 11 |
| Oil and grease | 11 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Q—Alaskan Mechanized Salmon Processing Subcategory existing sources (BPT) (a) Any mechanized salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.172 (BPT) Oil and grease 29 11 |
| Oil and grease | 28 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Q—Alaskan Mechanized Salmon Processing Subcategory new sources (NSPS) (1) Any mechanized salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.175 (NSPS) Oil and grease 28 10 |
| Oil and grease | 10 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Q—Alaskan Mechanized Salmon Processing Subcategory new sources (NSPS) (1) Any mechanized salmon processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.175 (NSPS) Oil and grease 28 10 |
| Oil and grease | 0.31 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart R—West Coast Hand-Butchered Salmon Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.182 (BPT) Oil and grease 0.31 0.19 |
| Oil and grease | 0.19 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart R—West Coast Hand-Butchered Salmon Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.182 (BPT) Oil and grease 0.31 0.19 |
| Oil and grease | 0.045 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart R—West Coast Hand-Butchered Salmon Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.185 (NSPS) Oil and grease 0.045 0.026 |
| Oil and grease | 0.026 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart R—West Coast Hand-Butchered Salmon Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.185 (NSPS) Oil and grease 0.045 0.026 |
| Oil and grease | 29 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart S—West Coast Mechanized Salmon Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.192 (BPT) Oil and grease 29 11 |
| Oil and grease | 11 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart S—West Coast Mechanized Salmon Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.192 (BPT) Oil and grease 29 11 |
| Oil and grease | 4.2 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart S—West Coast Mechanized Salmon Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.195 (NSPS) Oil and grease 4.2 1.5 |
| Oil and grease | 1.5 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart S—West Coast Mechanized Salmon Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.195 (NSPS) Oil and grease 4.2 1.5 |
| Oil and grease | 4.3 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart T—Alaskan Bottom Fish Processing Subcategory existing sources (BPT) (a) Any Alaskan bottom fish processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.202 (BPT) Oil and grease 4.3 0.56 |
| Oil and grease | 0.56 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart T—Alaskan Bottom Fish Processing Subcategory existing sources (BPT) (a) Any Alaskan bottom fish processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.202 (BPT) Oil and grease 4.3 0.56 |
| Oil and grease | 2.6 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart T—Alaskan Bottom Fish Processing Subcategory new sources (NSPS) (1) Any Alaskan bottom fish processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.205 (NSPS) Oil and grease 2.6 0.34 |
| Oil and grease | 0.34 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart T—Alaskan Bottom Fish Processing Subcategory new sources (NSPS) (1) Any Alaskan bottom fish processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.205 (NSPS) Oil and grease 2.6 0.34 |
| Oil and grease | 1.0 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart U—Non-Alaskan Conventional Bottom Fish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.212 (BPT) Oil and grease 1.0 0.55 |
| Oil and grease | 0.55 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart U—Non-Alaskan Conventional Bottom Fish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.212 (BPT) Oil and grease 1.0 0.55 |
| Oil and grease | 0.077 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart U—Non-Alaskan Conventional Bottom Fish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.215 (NSPS) Oil and grease 0.077 0.042 |
| Oil and grease | 0.042 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart U—Non-Alaskan Conventional Bottom Fish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.215 (NSPS) Oil and grease 0.077 0.042 |
| Oil and grease | 9.9 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart V—Non-Alaskan Mechanized Bottom Fish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.222 (BPT) Oil and grease 9.9 3.9 |
| Oil and grease | 3.9 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart V—Non-Alaskan Mechanized Bottom Fish Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.222 (BPT) Oil and grease 9.9 3.9 |
| Oil and grease | 1.2 | kilograms per 1,000 kg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart V—Non-Alaskan Mechanized Bottom Fish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.225 (NSPS) Oil and grease 1.2 0.47 |
| Oil and grease | 0.47 | kilograms per 1,000 kg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart V—Non-Alaskan Mechanized Bottom Fish Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.225 (NSPS) Oil and grease 1.2 0.47 |
| Oil and grease | 0.60 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart W—Hand-Shucked Clam Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.232 (BPT) Oil and grease 0.60 0.23 |
| Oil and grease | 0.23 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart W—Hand-Shucked Clam Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.232 (BPT) Oil and grease 0.60 0.23 |
| Oil and grease | 0.56 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart W—Hand-Shucked Clam Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.235 (NSPS) Oil and grease 0.56 0.21 |
| Oil and grease | 0.21 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart W—Hand-Shucked Clam Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.235 (NSPS) Oil and grease 0.56 0.21 |
| Oil and grease | 4.2 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart X—Mechanized Clam Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.242 (BPT) Oil and grease 4.2 0.97 |
| Oil and grease | 0.97 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart X—Mechanized Clam Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.242 (BPT) Oil and grease 4.2 0.97 |
| Oil and grease | 0.40 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart X—Mechanized Clam Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.245 (NSPS) Oil and grease 0.40 0.092 |
| Oil and grease | 0.092 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart X—Mechanized Clam Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.245 (NSPS) Oil and grease 0.40 0.092 |
| Oil and grease | 2.4 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.252 (BPT) Oil and grease 2.4 1.8 |
| Oil and grease | 1.8 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.252 (BPT) Oil and grease 2.4 1.8 |
| Oil and grease | 2.2 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.255 (NSPS) Oil and grease 2.2 1.7 |
| Oil and grease | 1.7 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.255 (NSPS) Oil and grease 2.2 1.7 |
| Oil and grease | 2.2 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory existing sources (BCT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.257 (BCT) Oil and grease 2.2 1.7 |
| Oil and grease | 1.7 | kilograms per 1,000 kg of product | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Y—Pacific Coast Hand-Shucked Oyster Processing Subcategory existing sources (BCT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.257 (BCT) Oil and grease 2.2 1.7 | |
| Oil and grease | 1.2 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.262 (BPT) Oil and grease 1.2 0.81 |
| Oil and grease | 0.81 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.262 (BPT) Oil and grease 1.2 0.81 |
| Oil and grease | 1.1 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.265 (NSPS) Oil and grease 1.1 0.77 |
| Oil and grease | 0.77 | kilograms per 1,000 kg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.265 (NSPS) Oil and grease 1.1 0.77 |
| Oil and grease | 1.1 | kilograms per 1,000 kg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory existing sources (BCT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.267 (BCT) Oil and grease 1.1 0.77 |
| Oil and grease | 0.77 | kilograms per 1,000 kg of product | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart Z—Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory existing sources (BCT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.267 (BCT) Oil and grease 1.1 0.77 | |
| Oil and grease | 2.3 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AA—Steamed and Canned Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.272 (BPT) Oil and grease 2.3 1.7 |
| Oil and grease | 1.7 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AA—Steamed and Canned Oyster Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.272 (BPT) Oil and grease 2.3 1.7 |
| Oil and grease | 0.84 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AA—Steamed and Canned Oyster Processing Subcategory new sources (NSPS) Except for those steamed and canned oyster processing facilities which utilize air flotation treatment systems to meet the shrimp processing standards of performance for new sources under § 408.115, § 408.125, or § 408.135 and for which standards of performance should be derived on a case-by-case basis, the following standards of performance establish the quantity or quality of pollutants or po… | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.275 (NSPS) Oil and grease 0.84 0.42 |
| Oil and grease | 0.42 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AA—Steamed and Canned Oyster Processing Subcategory new sources (NSPS) Except for those steamed and canned oyster processing facilities which utilize air flotation treatment systems to meet the shrimp processing standards of performance for new sources under § 408.115, § 408.125, or § 408.135 and for which standards of performance should be derived on a case-by-case basis, the following standards of performance establish the quantity or quality of pollutants or po… | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.275 (NSPS) Oil and grease 0.84 0.42 |
| Oil and grease | 3.5 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory existing sources (BPT) (a) Any sardine processing facility which utilizes dry transportation systems from the fish storage area to the fish processing area shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.282 (BPT) Oil and grease 3.5 1.4 |
| Oil and grease | 1.4 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory existing sources (BPT) (a) Any sardine processing facility which utilizes dry transportation systems from the fish storage area to the fish processing area shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.282 (BPT) Oil and grease 3.5 1.4 |
| Oil and grease | 6.3 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory existing sources (BPT) (b) Any sardine processing facility not covered under § 408.282(a) shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.282 (BPT) Oil and grease 6.3 2.8 |
| Oil and grease | 2.8 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory existing sources (BPT) (b) Any sardine processing facility not covered under § 408.282(a) shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.282 (BPT) Oil and grease 6.3 2.8 |
| Oil and grease | 1.4 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.285 (NSPS) Oil and grease 1.4 0.57 |
| Oil and grease | 0.57 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AB—Sardine Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.285 (NSPS) Oil and grease 1.4 0.57 |
| Oil and grease | 7.7 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AC—Alaskan Scallop Processing Subcategory existing sources (BPT) (a) Any Alaskan scallop processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.292 (BPT) Oil and grease 7.7 0.24 |
| Oil and grease | 0.24 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AC—Alaskan Scallop Processing Subcategory existing sources (BPT) (a) Any Alaskan scallop processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.292 (BPT) Oil and grease 7.7 0.24 |
| Oil and grease | 7.3 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AC—Alaskan Scallop Processing Subcategory new sources (NSPS) (1) Any Alaskan scallop processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.295 (NSPS) Oil and grease 7.3 0.23 |
| Oil and grease | 0.23 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AC—Alaskan Scallop Processing Subcategory new sources (NSPS) (1) Any Alaskan scallop processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak, and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.295 (NSPS) Oil and grease 7.3 0.23 |
| Oil and grease | 7.7 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.302 (BPT) Oil and grease 7.7 0.24 |
| Oil and grease | 0.24 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.302 (BPT) Oil and grease 7.7 0.24 |
| Oil and grease | 7.3 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.305 (NSPS) Oil and grease 7.3 0.23 |
| Oil and grease | 0.23 | kg/kkg of product | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.305 (NSPS) Oil and grease 7.3 0.23 |
| Oil and grease | 7.3 | kg/kkg of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory existing sources (BCT) column: Efflluent limitations | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.307 (BCT) Oil and grease 7.3 0.23 |
| Oil and grease | 0.23 | kg/kkg of product | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AD—Non-Alaskan Scallop Processing Subcategory existing sources (BCT) column: Efflluent limitations | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.307 (BCT) Oil and grease 7.3 0.23 | |
| Oil and grease | 27 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AE—Alaskan Herring Fillet Processing Subcategory existing sources (BPT) (a) Any herring fillet processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.312 (BPT) Oil and grease 27 10 |
| Oil and grease | 10 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AE—Alaskan Herring Fillet Processing Subcategory existing sources (BPT) (a) Any herring fillet processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.312 (BPT) Oil and grease 27 10 |
| Oil and grease | 20 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AE—Alaskan Herring Fillet Processing Subcategory new sources (NSPS) (1) Any herring fillet processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.315 (NSPS) Oil and grease 20 7.3 |
| Oil and grease | 7.3 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AE—Alaskan Herring Fillet Processing Subcategory new sources (NSPS) (1) Any herring fillet processing facility located in population or processing centers including but not limited to Anchorage, Cordova, Juneau, Ketchikan, Kodiak and Petersburg shall meet the following limitations: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.315 (NSPS) Oil and grease 20 7.3 |
| Oil and grease | 27 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AF—Non-Alaskan Herring Fillet Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.322 (BPT) Oil and grease 27 10 |
| Oil and grease | 10 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AF—Non-Alaskan Herring Fillet Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.322 (BPT) Oil and grease 27 10 |
| Oil and grease | 2.9 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AF—Non-Alaskan Herring Fillet Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.325 (NSPS) Oil and grease 2.9 1.1 |
| Oil and grease | 1.1 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AF—Non-Alaskan Herring Fillet Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.325 (NSPS) Oil and grease 2.9 1.1 |
| Oil and grease | 2.2 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.332 (BPT) Oil and grease 2.2 1.4 |
| Oil and grease | 1.4 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory existing sources (BPT) | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.332 (BPT) Oil and grease 2.2 1.4 |
| Oil and grease | 2.1 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.335 (NSPS) Oil and grease 2.1 1.3 |
| Oil and grease | 1.3 | kg/kkg of seafood | monthly average | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.335 (NSPS) Oil and grease 2.1 1.3 |
| Oil and grease | 21 | kg/kkg of seafood | daily maximum | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory existing sources (BCT) column: Efflluent limitations | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.337 (BCT) Oil and grease 21 1.3 |
| Oil and grease | 1.3 | kg/kkg of seafood | effluent · limit | route: direct cites: 40 CFR 408 the discharge is of the Subpart AG—Abalone Processing Subcategory existing sources (BCT) column: Efflluent limitations | 40 CFR Part 408 — PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY 40 CFR 408.337 (BCT) Oil and grease 21 1.3 | |
| Oil and grease | 7.2 | Kg/kkg (or pounds per 1,000 lb) of wool | daily maximum | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.12 (BPT) Oil and grease 7.2 3.6 |
| Oil and grease | 3.6 | Kg/kkg (or pounds per 1,000 lb) of wool | monthly average | effluent · limit | route: direct cites: 40 CFR 410 the discharge is of the Subpart A—Wool Scouring Subcategory existing sources (BPT) | 40 CFR Part 410 — PART 410—TEXTILE MILLS POINT SOURCE CATEGORY 40 CFR 410.12 (BPT) Oil and grease 7.2 3.6 |
| Oil and grease | 0.0020 | Kg/kkg (or pounds per 1,000 lb) of product | daily maximum | effluent · limit | route: direct cites: 40 CFR 415 the discharge is of the Subpart AW—Oxygen and Nitrogen Production Subcategory existing sources (BPT) table: Subpart AW—Oxygen and Nitrogen | 40 CFR Part 415 — PART 415—INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 415.492 (BPT) Oil and grease 0.0020 0.0010 |
| Oil and grease | 0.0010 | Kg/kkg (or pounds per 1,000 lb) of product | monthly average | effluent · limit | route: direct cites: 40 CFR 415 the discharge is of the Subpart AW—Oxygen and Nitrogen Production Subcategory existing sources (BPT) table: Subpart AW—Oxygen and Nitrogen | 40 CFR Part 415 — PART 415—INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY 40 CFR 415.492 (BPT) Oil and grease 0.0020 0.0010 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.12 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.12 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | 0.10 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.13 (BAT) Oil and grease 0.10 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.13 (BAT) Oil and grease 0.10 .05 |
| Oil and grease | 0.10 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.15 (NSPS) Oil and grease 0.10 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart A—Soap Manufacturing by Batch Kettle Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.15 (NSPS) Oil and grease 0.10 .05 |
| Oil and grease | 0.90 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BPT) (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.22 (BPT) Oil and grease 0.90 .30 |
| Oil and grease | .30 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BPT) (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.22 (BPT) Oil and grease 0.90 .30 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BPT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a point source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.22 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BPT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a point source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.22 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BAT) (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.23 (BAT) Oil and grease 0.30 .15 |
| Oil and grease | .15 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BAT) (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.23 (BAT) Oil and grease 0.30 .15 |
| Oil and grease | 0.20 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BAT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a point source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.23 (BAT) Oil and grease 0.20 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory existing sources (BAT) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a point source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.23 (BAT) Oil and grease 0.20 .10 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory new sources (NSPS) (a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.25 (NSPS) Oil and grease 0.30 .15 |
| Oil and grease | .15 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory new sources (NSPS) (a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.25 (NSPS) Oil and grease 0.30 .15 |
| Oil and grease | 0.20 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory new sources (NSPS) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a new source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.25 (NSPS) Oil and grease 0.20 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart B—Fatty Acid Manufacturing by Fat Splitting Subcategory new sources (NSPS) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to the hydrogenation of fatty acids, which may be discharged by a new source subject to the provisions of this subpart in addition to the discharge allowed by paragraph (a) of this section. | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.25 (NSPS) Oil and grease 0.20 .10 |
| Oil and grease | 0.03 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.32 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.32 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.33 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.33 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.35 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart C—Soap Manufacturing by Fatty Acid Neutralization Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.35 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.42 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.42 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | 0.08 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.43 (BAT) Oil and grease 0.08 .04 |
| Oil and grease | .04 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.43 (BAT) Oil and grease 0.08 .04 |
| Oil and grease | 0.08 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.45 (NSPS) Oil and grease 0.08 .04 |
| Oil and grease | .04 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart D—Glycerine Concentration Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.45 (NSPS) Oil and grease 0.08 .04 |
| Oil and grease | 0.30 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.52 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | .10 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.52 (BPT) Oil and grease 0.30 .10 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.53 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.53 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.55 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart E—Glycerine Distillation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.55 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | 0.03 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.62 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.62 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.63 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.63 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.65 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart F—Manufacture of Soap Flakes and Powders Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.65 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | 0.12 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.72 (BPT) Oil and grease 0.12 .04 |
| Oil and grease | .04 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.72 (BPT) Oil and grease 0.12 .04 |
| Oil and grease | 0.06 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.73 (BAT) Oil and grease 0.06 .03 |
| Oil and grease | .03 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.73 (BAT) Oil and grease 0.06 .03 |
| Oil and grease | 0.06 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.75 (NSPS) Oil and grease 0.06 .03 |
| Oil and grease | .03 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart G—Manufacture of Bar Soaps Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.75 (NSPS) Oil and grease 0.06 .03 |
| Oil and grease | 0.03 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.82 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.82 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.83 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.83 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.85 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart H—Manufacture of Liquid Soaps Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.85 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | 0.25 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.92 (BPT) Oil and grease 0.25 .07 |
| Oil and grease | .07 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.92 (BPT) Oil and grease 0.25 .07 |
| Oil and grease | 0.21 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.93 (BAT) Oil and grease 0.21 .07 |
| Oil and grease | .07 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.93 (BAT) Oil and grease 0.21 .07 |
| Oil and grease | 0.12 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.95 (NSPS) Oil and grease 0.12 .04 |
| Oil and grease | .04 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart I—Oleum Sulfonation and Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.95 (NSPS) Oil and grease 0.12 .04 |
| Oil and grease | 0.15 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.102 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.102 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | 0.08 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.103 (BAT) Oil and grease 0.08 .04 |
| Oil and grease | .04 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.103 (BAT) Oil and grease 0.08 .04 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.105 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart J—Air—SO3 Sulfation and Sulfonation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.105 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | 0.10 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.112 (BPT) Oil and grease 0.10 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.112 (BPT) Oil and grease 0.10 .05 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.113 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.113 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.115 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart K—SO3 Solvent and Vacuum Sulfonation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.115 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | 0.15 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.122 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.122 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.123 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.123 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.125 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart L—Sulfamic Acid Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.125 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | 0.15 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.132 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | .05 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.132 (BPT) Oil and grease 0.15 .05 |
| Oil and grease | 0.06 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.133 (BAT) Oil and grease 0.06 .03 |
| Oil and grease | .03 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.133 (BAT) Oil and grease 0.06 .03 |
| Oil and grease | 0.06 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart; | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.135 (NSPS) Oil and grease 0.06 .03 |
| Oil and grease | .03 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart M—Chlorosulfonic Acid Sulfation Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart; | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.135 (NSPS) Oil and grease 0.06 .03 |
| Oil and grease | 0.03 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.142 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.142 (BPT) Oil and grease 0.03 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.143 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.143 (BAT) Oil and grease 0.02 .01 |
| Oil and grease | 0.02 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.145 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart N—Neutralization of Sulfuric Acid Esters and Sulfonic Acids Subcategory new sources (NSPS) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.145 (NSPS) Oil and grease 0.02 .01 |
| Oil and grease | 0.015 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BPT) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.152 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BPT) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.152 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | 0.09 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BPT) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.152 (BPT) Oil and grease 0.09 .03 |
| Oil and grease | .03 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BPT) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.152 (BPT) Oil and grease 0.09 .03 |
| Oil and grease | 0.01 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BAT) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.153 (BAT) Oil and grease 0.01 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BAT) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.153 (BAT) Oil and grease 0.01 .005 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BAT) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.153 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BAT) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.153 (BAT) Oil and grease 0.04 .02 |
| Oil and grease | 0.005 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory existing sources (BAT) (c) For fast turnaround operation of a spray tower, the following values pertain: The maximum for any one day when the number of turnarounds exceeds six in any particular thirty consecutive day period shall be the sum of the appropriate value below and that from paragraph (a) or (b) of this section; and the average of daily values for thirty consecutive days shall be the values shown below mult… | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.153 (BAT) Oil and grease 0.005 |
| Oil and grease | 0.01 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory new sources (NSPS) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.155 (NSPS) Oil and grease 0.01 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory new sources (NSPS) (a) For normal operation of spray drying towers as defined above, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.155 (NSPS) Oil and grease 0.01 .005 |
| Oil and grease | 0.04 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory new sources (NSPS) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.155 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | .02 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory new sources (NSPS) (b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.155 (NSPS) Oil and grease 0.04 .02 |
| Oil and grease | 0.005 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart O—Manufacture of Spray Dried Detergents Subcategory new sources (NSPS) (c) For fast turnaround operation of a spray tower, the following values pertain: The maximum for any one day when the number of turnarounds exceeds six in any particular thirty consecutive day period shall be the sum of the appropriate value below and that from paragraph (a) or (b) of this section; and the average of daily values for thirty consecutive days shall be the value shown below multi… | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.155 (NSPS) Oil and grease 0.005 |
| Oil and grease | 0.015 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory existing sources (BPT) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.162 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory existing sources (BPT) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.162 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | 0.01 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory existing sources (BAT) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.163 (BAT) Oil and grease 0.01 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory existing sources (BAT) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.163 (BAT) Oil and grease 0.01 .005 |
| Oil and grease | 0.01 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory new sources (NSPS) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.165 (NSPS) Oil and grease 0.01 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart P—Manufacture of Liquid Detergents Subcategory new sources (NSPS) (a) For normal liquid detergent operations the following values pertain: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.165 (NSPS) Oil and grease 0.01 .005 |
| Oil and grease | 0.015 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart Q—Manufacture of Detergents by Dry Blending Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.172 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | .005 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart Q—Manufacture of Detergents by Dry Blending Subcategory existing sources (BPT) | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.172 (BPT) Oil and grease 0.015 .005 |
| Oil and grease | 0.01 | kilograms per 1,000 kg of anhydrous product | daily maximum | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart Q—Manufacture of Detergents by Dry Blending Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.173 (BAT) Oil and grease 0.01 .01 |
| Oil and grease | .01 | kilograms per 1,000 kg of anhydrous product | monthly average | effluent · limit | route: direct cites: 40 CFR 417 the discharge is of the Subpart Q—Manufacture of Detergents by Dry Blending Subcategory existing sources (BAT) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable: | 40 CFR Part 417 — PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY 40 CFR 417.173 (BAT) Oil and grease 0.01 .01 |
This page shows the first 250 of 2,453 rows, Indiana's own first. All of them, as JSON 200 at a time: 1–200 · 201–400 · 401–600 · 601–800 · 801–1,000 · 1,001–1,200 · 1,201–1,400 · 1,401–1,600 · 1,601–1,800 · 1,801–2,000 · 2,001–2,200 · 2,201–2,400 · 2,401–2,453
Every instrument we hold for Indiana (US-IN) and the place above it, United States (US): 67 instruments, for every parameter name matching “oil and grease alternate monitoring parameter”: oil and grease alternate monitoring parameter.
2133233aad39c4df1dfd22825d228cb8ca25365a51aadadb9aacb46241c2ceea — 540 rows here940c0585603141d76af0790879f64c667489809aac317d090485198f492a1311 — 388 rows here4b59a142f54a91aef8356c2f3c507cc96e171e01344aa388d2f55e6832ed2925 — 316 rows here15d00b2386811ecfdcc8334d57defe2f690d2f88798390abff59228c5aea1898 — 200 rows hered7cfd73b5bcf0e961e02ec53264492b2371277280003192841b7166b2a5012cf — 188 rows here3a0399ddea806eb34f0fe9b3c15efa97679757f340a125b4af5fdc234a93fe6c — 136 rows here39a50407f4cd89036e245861437f7961e58a8451efaa9fd6330ff45d381fa205 — 132 rows here4b5bd5a797a31a077d5a797de292aab3ed4938bf350995c3877c393d3c1f8428 — 128 rows heree9b2ea900bfea837890cb559b8db71416882d7666c81b683b11bdc700efb7b50 — 124 rows here3bac23cae59f82ac6f96310d28b2d8904c650932053de79f037f6d4f6d3db849 — 66 rows herecb5058a08c9472074411dfb00b10ae90efb4763be56c41b6c33d5fec477a555b — 54 rows here9984c22aee31f14ac6cc89b6895db16ce8ed6cdc39abf66752529e44a86fda45 — 36 rows here3b1a8b869cb040029bdcb18f0ff232995cfc9774f16112f5700bb1f5cb31daa4 — 24 rows here4a4e95e44a16b28b58efce43eca3878d712f9aaf1b73e5c36c783cc12c9bc06b — 24 rows here8e0e010c4a042c3d2350a03bd7a7c8a98559afa3a2ffa45a702685c0621afd01 — 22 rows here60cadc14b8fc25c39238a9d55cede55743d6b349ca20c8f8158b0f7e5d98fd64 — 18 rows here817c320835fb2f9cbb5e6218efb2f5cdcb0b0527933ae87d5a3976f0981127fd — 12 rows here4f4bb5077485ea6f8a27e678219c7400c18be7ca7824e5b21d1996399098cbc4 — 10 rows here9330b2255a5f7e74daf9175af898d9d28ae855a2560f50658d1bce4c6b8feded — 8 rows here83f54e1a9420fdb3abe9a4e4e8edd2060bbc0c5e0067824488d3f0f1cc50d328 — 7 rows here8ffc3a5ae0e6c7d8e929b9201225a003c95d5c0e6a73ed549ae0ef4bb94b22ed — 6 rows heree30d763aa2bf49914b8b02364329ed662c0af2bc1ac6ee13233ee65c1499a94e — 4 rows here904434c6e85600060669580acf042d53f5e711e3313e8aef038d9c60b244a740 — 4 rows here02c53988595c9f2911727f635f59f6a2af0c1d50ce06550c150a706321a505b3 — 2 rows hereebf67428a51e85f12785b92d537e6878c5f9838c87722ac2db82b3db673d1e23 — 2 rows here5903548fcfa58a4b6152d41cd1399b4c82e3684e69d5ea20a0fb89c1b71e4329 — 2 rows here9f178f66686e289aea4d4961eee13479c15774e48d25aea14710655d2aeb18f7 — no row hereaa9ac14c0ef8e5cffe6bfb5a5368ab853aa9128404ac004a3de7bc0bab0c24bd — no row here28dbdea077be653555fa562c999b78c741237e57d5b8efc8606d183ce33279da — no row here56de9012822853c75f8513babf1c1440ff957ff2145a12ec8ef5c1906da02f2d — no row here69910d7277f8067273b796c1905c6283621bc7c72723b388bab9b5c8f7983742 — no row here14a34390b41a1060c6d5d7ede5e6018f118680d1cb54643b81fa9b50abea37c4 — no row here2b162dead6acf77f69bd8a2a79a6195c30a6f7a6c82e29ec4754657603f1202d — no row here9c6c38baf048e0e1ed5f2c05df397ea581d48822b23c4b294e52b960b2d547f9 — no row here8652d1f3d1271a60d9c07a11c5e00c0c1e23da3fb57f25d86e40b9a487b25608 — no row here881822302cd9912ec4678ba7ccaa00276ff06f33a48ae154f399db6986c1ffda — no row here5b10885a56878a0a10277b8fdf945441e570a9316098995bb3f948e5bc5a52d9 — no row hereb9ba02c4f274d6907407c320e0fcce140e72aa79cf2e81ae80ae804f723e7bed — no row herea824cc1c96559e03e9d0013c6dc961092352baafce6b5daec6be1d3c9ef96c4f — no row here2aa1dbe8158371fa4360d0df2412ad8b47c124aab4173316b854dc9c06d9161a — no row here6ee241b7ee9a78250fccd4d4134366c8ccc74eceba4512675bc5db8a5be24cc5 — no row here59437ebfad1a7c3090dc8f3f11eac33d1cfa8c81e44baf92b3fcbfc75b584c19 — no row heree485b5e90afd26961e2964355f78ce1d1a1781ac67e588a9f2ea6fd1ad913db2 — no row here699f842280ca1f65a56712a21ad9906bb9d709f20624757e72df02c7f695e73e — no row here23be7bb993614d9248cff594a196b782587671393fc7b4f445eab69876b224d8 — no row here109ea8c5ee22a37622c2aa91dd21d79e528a5f9f3e9d01ecc8dc18c25b6afd9e — no row hereaea3b68c1fc9aac4ea3fa56240df79cf606e97c278fd0b499c3ec190dad2ee9a — no row hereb8df51b8c9ab0f6d765b07cb267f1aead5f9a257b5d9d914fb34511c1433a9bd — no row here0d9785d9dc37e256a6ea799566e33681f123b092975ccaaa01967665080b1598 — no row hereb5d02b5c87984639aaff6e500a6930c9e7b478cec825c013f26c72f715e32a0e — no row here07ce62c90f736e9aacb3b93854b6861d2d14ec3c7ed85146da489eb46ca5ebca — no row here6abcaec659f7bd98f5861813fc76e8a2f027753ba5488ec0da9540b3dff013a2 — no row hereca4f7d499465d74e9f9e97bbad32419b9e4d71c107bd17c21ec9348b86c19167 — no row here36066b7d5702811c70e1498b6ff9647599f1a883a18bd95449abc5900832e375 — no row here465264d203dabbec52b8a9e5afc03c9b9140c4f1758d0f5cf422a0df03d3cce3 — no row heree78d4825199d5ba2cf468f744603f403b7dbddbe3321955e6a0b1e344de50d7f — no row here4fcd842aa8d4463c015d5dc67a32412a7c554ad425715bb2375e64800bf4e7bd — no row here857e290109cd8028b70b239ab2b16e9c5d068a71e557a7c419ebba4dee2c40b4 — no row herec69109252c9521cd31b45755731369a860bb1282c273dea5fd6903836effa7c7 — no row herea1d0dba2ac83057cf619f9e0cb6f1fe5c8f9c908928310f266936510d4211a1c — no row herebd534eb2d8af38e141e1cd6236134a638298fbf14791b30279eeb47d815d7767 — no row herebe6b429558db9852c3456eb22c17046aa1a3335ee89e702e8afb793f9b5b25ec — no row herea0229d5a613672b46a000c5b9925dd3a23c3e05914bb020b7f739c69cecbb5fe — no row herea98e8b66948f546c71e119055eff012e6380857a255ec216a4247b658bcf040d — no row here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — no row here0160dc81b4f55d738a354a74de92488f149946ebfa7c6a6c64592f45348043d7 — no row hereRead from public law and public agency files. A row missing here is missing from our sources, not from the law of the place. Check the cited source before relying on a value.